why does my Honda Accord feel like it's bouncing when I drive

Honda Accord 10th Generation (2018-2022)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

500 words

Problem Statement

Learn how to diagnose and fix the bouncing sensation in your Honda Accord's suspension. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when working under the vehicle.
•Ensure the vehicle is on a level surface before lifting.

Symptoms

•Bouncing or oscillation of the vehicle while driving
•Increased noise from the suspension system
•Uneven tire wear
•Difficulty maintaining control during turns
•Noticeable vibrations felt in the steering wheel

Diagnostic Steps

1
Inspect the tires for proper inflation and any signs of damage or uneven wear.
2
Check the shock absorbers/struts for leakage or damage.
3
Examine the suspension components (e.g., control arms, bushings) for wear or play.
4
Perform a visual inspection of the wheel alignment.
5
Test drive the vehicle to replicate the bouncing sensation under various road conditions.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Air compressor
•Socket set
•Torque wrench
•Jack
•Jack stands
•Alignment machine

Parts Required

•Shock absorbers/struts
•Control arms or bushings (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the tires for proper inflation and any signs of damage or uneven wear.
2
Check the shock absorbers/struts for leakage or damage.
3
Examine the suspension components (e.g., control arms, bushings) for wear or play.
4
Perform a visual inspection of the wheel alignment.
5
Test drive the vehicle to replicate the bouncing sensation under various road conditions.

Solution

1. Preparation

Gather all necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the battery if any electronic components will be affected.

2. Inspect Tires

Sub-steps:
1. Remove any wheel covers if present.
2. Check tire pressure with a gauge; inflate to manufacturer specifications if needed.
3. Look for sidewall damage, bulges, or irregular wear patterns.
Tools Required: Tire pressure gauge, air compressor (if needed).

3. Replace Worn Shock Absorbers/Struts

Sub-steps:
1. Lift the vehicle using a jack and secure it with jack stands.
2. Remove the wheel to access the shock absorber/strut assembly.
3. Unscrew the top and bottom mounting bolts.
4. Remove the shock absorber/strut assembly from the vehicle.
5. Install the new shock absorber/strut by reversing the removal steps.
6. Torque the mounting bolts to the specification provided in the service manual.
Tools Required: Socket set, torque wrench, jack, jack stands.

4. Inspect and Replace Suspension Components

Sub-steps:
1. Visually inspect control arms and bushings for cracks or excessive wear.
2. If damaged, remove the affected components using a socket set.
3. Install new control arms or bushings and torque to specifications.
Tools Required: Socket set, torque wrench.

5. Wheel Alignment

Sub-steps:
1. After repairs, take the vehicle to a professional alignment shop.
2. Ensure that the alignment is adjusted according to manufacturer specifications.
Tools Required: Alignment machine (performed by professional).