why does my Honda Accord feel like it’s losing grip while driving

Honda Accord 9th Generation (2013-2017)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

483 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix loss of grip issues in Honda Accord. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is on a flat surface and secured before working on suspension.
•Disconnect the battery before working on brake systems to avoid accidental activation of electronic components.

Symptoms

•Slipping or skidding during acceleration or turns
•Uneven tire wear
•Vibration or shaking in the steering wheel
•Warning lights illuminated on the dashboard (e.g., ABS, traction control)
•Poor handling or drifting to one side
•Increased stopping distance

Diagnostic Steps

1
Inspect tire condition and pressure; check for uneven wear or damage.
2
Examine the suspension components visually for wear or damage.
3
Check the alignment settings; confirm they are within manufacturer specifications.
4
Scan for error codes using an OBD-II scanner to identify any electronic stability control issues.
5
Inspect brake components for wear or malfunction.
6
Test drive the vehicle under various conditions to replicate the issue and observe any additional symptoms.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Jack and jack stands
•Socket set
•Alignment machine
•OBD-II scanner

Parts Required

•Tires (if replacements are needed)
•Shock absorbers or struts (if worn)
•Brake pads and rotors (if worn)
•Suspension components (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tire condition and pressure; check for uneven wear or damage.
2
Examine the suspension components visually for wear or damage.
3
Check the alignment settings; confirm they are within manufacturer specifications.
4
Scan for error codes using an OBD-II scanner to identify any electronic stability control issues.
5
Inspect brake components for wear or malfunction.
6
Test drive the vehicle under various conditions to replicate the issue and observe any additional symptoms.

Solution

1. Tire Inspection and Replacement

Sub-steps:
1. Check each tire for tread depth using a tread depth gauge; replace tires if tread is below 2/32 inches.
2. Inspect for sidewall damage or bulges; replace tires as necessary.
3. Inflate tires to the manufacturer-recommended pressure (found in the owner’s manual or on the door jamb).

2. Suspension Repair

Sub-steps:
1. Jack up the vehicle and secure it on jack stands.
2. Remove the wheels to access suspension components.
3. Inspect shock absorbers and struts for leakage; replace if damaged.
4. Check control arms, bushings, and ball joints for excessive play or wear; replace any defective parts.

3. Wheel Alignment

Sub-steps:
1. After addressing suspension issues, align the wheels using a professional alignment machine.
2. Adjust camber, caster, and toe angles to meet manufacturer specifications.
3. Test drive to ensure proper handling after alignment.

4. Brake Inspection and Service

Sub-steps:
1. Remove the wheels to access brake components.
2. Inspect brake pads and rotors for wear; replace if necessary.
3. Ensure brake calipers are functioning properly and not sticking.