FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Honda Civic 10th Generation (2016-2021) has a fuel gauge that doesn't work - Honda Civic
Home/Cars/Honda/Civic/10th Generation (2016-2021)/my Honda Civic 10th Generation (2016-2021) has a fuel gauge that doesn't work

my Honda Civic 10th Generation (2016-2021) has a fuel gauge that doesn't work

Honda Civic 10th Generation (2016-2021)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
540 words

Problem Statement

Learn how to diagnose and fix a malfunctioning fuel gauge in Honda Civic 10th Generation (2016-2021). Step-by-step guide with tools and procedures.

Affected Component
Fuel System
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Relieve fuel system pressure before removing the fuel pump assembly.

Symptoms

  • •Fuel gauge needle remains at empty regardless of fuel level
  • •"Low Fuel" warning light illuminated
  • •Inconsistent fuel readings after refueling
  • •Possible check engine light related to fuel system
  • •Fuel range indicator not updating

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Socket set
  • •Screwdrivers
  • •Safety glasses

Parts Required

  • •Fuel level sending unit (if faulty)
  • •Fuel gauge fuse (if blown)

Additional Information

Affected Component
Fuel System
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Tools Required: OBD-II scanner, multimeter, socket set, screwdrivers, safety glasses.
  • Disconnect the negative battery terminal to avoid electrical shorts.
  • Ensure the vehicle is on a level surface and the engine is off.
2. Inspect Fuel Gauge Fuse
  • Locate the fuse box, usually under the dashboard or in the engine compartment.
  • Remove the cover and find the fuse related to the fuel gauge (refer to the owner's manual for exact location).
  • Inspect the fuse for continuity using a multimeter; replace if necessary with the same amperage fuse.
3. Check Wiring Connections
  • Remove the rear seat or access panel to reach the fuel tank wiring harness.
  • Visually inspect the wiring for any signs of wear, fraying, or corrosion.
  • Disconnect and reconnect the harness to ensure a good connection.
4. Test Fuel Level Sending Unit
  • Remove the fuel pump assembly from the fuel tank (ensure to relieve fuel pressure first).
  • Measure the resistance of the fuel level sending unit using a multimeter; it should change with the float's position.
  • If the resistance is not within specifications, replace the sending unit.
5. Test Fuel Gauge
  • Reconnect the fuel pump assembly without fully securing it.
  • Connect the battery and turn the ignition to the "ON" position (do not start the engine).
  • Apply a known voltage (typically 5V) to the gauge input wire to see if the gauge responds.
  • If the gauge operates correctly, ensure all connections are secure and reassemble.