FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Honda Civic 10th Generation (2016-2021) power windows won't work - Honda Civic
Home/Cars/Honda/Civic/10th Generation (2016-2021)/my Honda Civic 10th Generation (2016-2021) power windows won't work

my Honda Civic 10th Generation (2016-2021) power windows won't work

Honda Civic 10th Generation (2016-2021)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
515 words

Problem Statement

Learn how to diagnose and fix non-operational power windows in Honda Civic 10th Generation (2016-2021). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Electrical
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems to avoid short circuits.

Symptoms

  • •No response when pressing the window switch
  • •Windows remain fully closed or open with no ability to adjust
  • •Possible blown fuse (if other electrical components are affected)
  • •Window lockout switch may not function
  • •Unusual noises from the window motor when attempting to operate

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Socket set
  • •Trim removal tools
  • •Fuse puller

Parts Required

  • •Window switch (if defective)
  • •Window motor (if faulty)
  • •Replacement fuses (if blown)

Additional Information

Affected Component
Electrical
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the vehicle battery to ensure safety while working on electrical components.
2. Check and Replace Fuse
  • Locate the fuse box (usually under the dash or in the engine compartment).
  • Identify the power window fuse using the fuse diagram.
  • Remove the fuse using a fuse puller or needle-nose pliers.
  • Inspect the fuse for continuity. If blown, replace it with a fuse of the same amperage.
3. Inspect and Replace Window Switch
  • Remove the door panel using a socket set and trim removal tools.
  • Disconnect the electrical connector from the window switch.
  • Test the switch with a multimeter. Replace if defective.
  • Reconnect the new switch and reassemble the door panel.
4. Inspect and Repair Wiring
  • Check the wiring harness leading to the window motor for any damage.
  • Repair any frayed or damaged wires with electrical tape or by replacing sections of the harness.
  • Ensure all connections are secure and free from corrosion.
5. Test Window Motor
  • If the switch is functioning and wiring is intact, remove the window motor.
  • Connect the motor directly to a power source (ensure polarity is correct).
  • If the motor does not operate, replace it with a new one.