how to reset the maintenance light on Honda Pilot YF3 (2016-2022)

Honda Pilot Third Generation (2016-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

359 words

Problem Statement

Learn how to reset the maintenance light on Honda Pilot YF3 (2016-2022) with this step-by-step guide. Ensure your vehicle's maintenance light is off.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked on a level surface before performing any resets.

Symptoms

•Maintenance light illuminated on the dashboard
•Vehicle may not indicate the next service interval
•No other warning lights present

Diagnostic Steps

1
Ensure the vehicle is in the 'On' or 'Run' position without starting the engine.
2
Press the 'Menu' button on the steering wheel to access the multi-information display.
3
Use the arrow buttons to navigate to the 'Maintenance' section.
4
Select 'Oil Life' or 'Maintenance' to view the current status.
5
Press and hold the 'Enter' button until the maintenance light resets.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'On' or 'Run' position without starting the engine.
2
Press the 'Menu' button on the steering wheel to access the multi-information display.
3
Use the arrow buttons to navigate to the 'Maintenance' section.
4
Select 'Oil Life' or 'Maintenance' to view the current status.
5
Press and hold the 'Enter' button until the maintenance light resets.

Solution

1. Preparation

Gather necessary tools: none required for this procedure.
Ensure the vehicle is parked and in "On" or "Run" position.

2. Access Multi-Information Display

Sit in the driver's seat and close the door.
Turn the ignition to the "On" position without starting the engine.

Press the "Menu" button on the steering wheel.
Use the arrow buttons to scroll through the options until you reach the "Maintenance" section.

4. Reset Maintenance Light

Select "Oil Life" or the relevant maintenance option.
Press and hold the "Enter" button until a confirmation message appears.
Release the button once the light resets to 100%.

5. Confirm Reset

Check the maintenance light on the dashboard to ensure it is no longer illuminated.
Turn off the ignition and then restart the engine to verify that the reset was successful.