FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Honda Pilot Third Generation (2016-present) gets poor gas mileage what's wrong - Honda Pilot
Home/Cars/Honda/Pilot/Third Generation (2016-present)/my Honda Pilot Third Generation (2016-present) gets poor gas mileage what's wrong

my Honda Pilot Third Generation (2016-present) gets poor gas mileage what's wrong

Honda Pilot Third Generation (2016-present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
513 words

Problem Statement

Discover how to diagnose and fix poor gas mileage in Honda Pilot (2016-2023). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Fuel System
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems
  • •Ensure the engine is cool before inspecting components

Symptoms

  • •Check engine light illuminated
  • •Rough idle
  • •Decreased acceleration
  • •Unusual fuel odors
  • •Increased emissions
  • •Engine stalling during stop-and-go traffic

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Tire pressure gauge
  • •Socket set
  • •Multimeter
  • •Torx/Philips screwdriver
  • •MAF cleaner spray

Parts Required

  • •Air filter
  • •MAF sensor (if needed)
  • •Fuel injectors (if needed)
  • •Fuel filter (if needed)

Additional Information

Affected Component
Fuel System
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
6 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the battery to ensure safety while working on electrical components.
2. Replace Air Filter
  • Locate the air filter housing.
  • Open the housing by unclipping it or unscrewing any fasteners.
  • Remove the old air filter and dispose of it.
  • Insert a new air filter, ensuring it fits snugly in the housing.
  • Reassemble the air filter housing and secure it.
3. Clean/Replace MAF Sensor
  • Locate the MAF sensor in the air intake duct.
  • Disconnect the electrical connector from the MAF sensor.
  • Remove the sensor using a Torx or Philips screwdriver.
  • Clean the sensor with MAF cleaner spray; if heavily contaminated or damaged, replace it with a new one.
  • Reinstall the MAF sensor and reconnect the electrical connector.
4. Inspect and Clean Fuel Injectors
  • Remove the intake manifold to access the fuel injectors.
  • Disconnect the fuel lines and electrical connectors from the injectors.
  • Remove the injectors using appropriate tools.
  • Clean the injectors using a specialized cleaning kit or replace them if they are faulty.
  • Reinstall the injectors, reconnect fuel lines and electrical connectors, and reassemble the intake manifold.
5. Inspect Tire Pressure and Condition
  • Check the tire pressure with a tire gauge; inflate to the recommended PSI if low.
  • Inspect tire tread for wear and replace tires if necessary.