my Tesla Model Y Current (2020-present) key fob is not working what should I do

Tesla Model Y Current (2020-present)

Error Codes

30-60 minutes

Time

medium

Difficulty

medium

Severity

3 min read

446 words

Problem Statement

Learn how to troubleshoot and fix a non-functioning key fob for Tesla Model Y (2020-present). Step-by-step guide with diagnostic and repair instructions.

Affected Component

Electrical

Estimated Time

30-60 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location and cannot roll away during this procedure.

Symptoms

•Key fob not detected by the vehicle
•Unable to unlock or start the vehicle
•LED indicator on the key fob not illuminating
•Key fob not responding to buttons
•Check for battery status warning in the Tesla app

Diagnostic Steps

1
Check the battery level of the key fob using the Tesla app or by attempting to unlock the vehicle.
2
Inspect the key fob for physical damage, such as cracks or water exposure.
3
Replace the key fob battery and test the fob functionality.
4
Attempt to re-sync the key fob with the vehicle by following Tesla’s re-pairing instructions.
5
Check for any software updates on the vehicle’s infotainment system that may affect key fob functionality.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Small flathead screwdriver
•New key fob battery (CR2032)

Parts Required

•CR2032 battery

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the battery level of the key fob using the Tesla app or by attempting to unlock the vehicle.
2
Inspect the key fob for physical damage, such as cracks or water exposure.
3
Replace the key fob battery and test the fob functionality.
4
Attempt to re-sync the key fob with the vehicle by following Tesla’s re-pairing instructions.
5
Check for any software updates on the vehicle’s infotainment system that may affect key fob functionality.

Solution

1. Preparation

Tools Required: Small flathead screwdriver, new key fob battery (CR2032).
Safety Warnings: Ensure the vehicle is in a safe location and cannot roll away during this procedure.

2. Remove Key Fob Battery

Use the small flathead screwdriver to gently pry open the key fob casing.
Carefully separate the two halves of the key fob without damaging internal components.
Locate the battery inside the fob and note its orientation.

3. Replace Battery

Remove the old battery from the fob.
Insert the new CR2032 battery in the same orientation as the old one (positive side facing up).
Reassemble the key fob by aligning the two halves and pressing them together until they click into place.

4. Re-sync Key Fob with Vehicle

Inside the vehicle, go to the 'Controls' menu on the touchscreen.
Select the 'Locks' option.
Follow the prompts to add a new key fob. This usually involves pressing the fob against the center console or the designated area.
Confirm that the key fob is recognized and can unlock/start the vehicle.