how to reset the maintenance light on Acura MDX YF3 (2022-Present)

Symptoms

• Maintenance Light On: The maintenance reminder indicator illuminates on the dashboard, indicating that scheduled maintenance is due.
• Possible Service Messages: Other messages related to maintenance may also appear on the display.

Diagnostic Steps

1. Confirm Maintenance Required: Ensure that maintenance has been performed (oil change, tire rotation, etc.) before resetting the light.
2. Check Owner's Manual: Review the owner's manual for specific instructions related to maintenance light reset, if needed.

Repair Instructions

1. Turn on the Ignition: Insert the key fob into the ignition slot and press the Start button without pressing the brake pedal to turn on the ignition (the dashboard lights should illuminate).

2. Navigate to Settings:

   • Use the Menu button on the infotainment system or the touchscreen display.
   • Select Vehicle Settings.

3. Select Maintenance Info:

   • From the Vehicle Settings menu, navigate to Maintenance Info or Maintenance.

4. Reset Maintenance Light:

   • Once in the Maintenance Info section, look for an option that says Reset Maintenance Light or Reset.
   • Follow the prompts to reset the maintenance light. Confirm any messages that ask if you want to reset.

5. Turn Off Ignition: After the reset is complete, press the Start button to turn off the ignition.

6. Verify Reset: Turn the ignition back on to ensure that the maintenance light is no longer illuminated. If the light is still on, repeat the steps.

Estimated Time for Maintenance Light Reset

• Time Required: Approximately 5 to 10 minutes.

Safety Warnings

• Do Not Ignore Maintenance: Resetting the maintenance light without performing the required maintenance can lead to engine problems or vehicle malfunction.
• Be Cautious with Ignition: Ensure that you do not accidentally engage the brake pedal while attempting to turn on the ignition to avoid starting the engine.