FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Oil consumption high solution A6 - Audi A6
Home/Cars/Audi/A6/C7 (2011-2018)/Oil consumption high solution A6

Oil consumption high solution A6

Audi A6 C7 (2011-2018)

Error Codes
hard
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
559 words

Problem Statement

Diagnose and resolve high oil consumption in Audi A6 C7 (2011-2018) by addressing common causes like piston ring wear and PCV system issues.

Affected Component
engine

Symptoms

  • •High oil consumption
  • •Frequent low oil warnings
  • •Need to add oil more often

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II Scanner
  • •Compression Tester
  • •Leak Down Tester
  • •Flashlight
  • •Engine Oil Pressure Gauge
  • •Socket Set
  • •Torque Wrench
  • •Screwdrivers
  • •Engine Hoist
  • •Seal Puller

Additional Information

Affected Component
engine
Difficulty
hard
Severity
medium
Tools Required
10 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Common Causes:
  1. Piston Ring Wear: Excessive wear can lead to oil passing into the combustion chamber.
  2. Valve Stem Seals: Worn seals can cause oil to leak into the combustion chamber.
  3. PCV (Positive Crankcase Ventilation) System: Malfunction or clogging can lead to increased oil consumption.
  4. Oil Leaks: External leaks from gaskets or seals can lead to oil loss.

Tools Required:

  • OBD-II Scanner
  • Compression Tester
  • Leak Down Tester
  • Flashlight
  • Engine Oil Pressure Gauge

Steps:

  1. Check for Engine Codes:

    • Use an OBD-II scanner to check for any error codes that might point to issues with the PCV system or misfires.

  2. Visual Inspection:

    • Inspect for visible oil leaks around the engine, especially near the valve cover gasket, oil pan gasket, and front/rear main seals.
    • Use a flashlight to check for oil residue or wet areas.

  3. Compression Test:

    • Perform a compression test to check for worn piston rings. Remove all spark plugs and disable the fuel system before testing. Acceptable compression readings should generally be above 120 psi with less than 10% variance between cylinders.

  4. Leak Down Test:

    • Conduct a leak down test to further diagnose piston ring wear. This test will help confirm if the issue is with the rings, valves, or head gasket.

  5. PCV System Inspection:

    • Check the PCV valve and associated hoses for blockages or failure. Replace if necessary.

  6. Oil Pressure Test:

    • Use an oil pressure gauge to ensure the engine maintains proper oil pressure. Low oil pressure can indicate internal engine wear.
Repair Instructions:

Tools Required:

  • Socket Set
  • Torque Wrench
  • Screwdrivers
  • Engine Hoist (if necessary for piston ring replacement)
  • Seal Puller
  • New Gaskets and Seals
  • Replacement Parts (PCV Valve, Piston Rings, etc.)

Steps:

  1. PCV System Replacement:

    • If the PCV valve is faulty, replace it along with any damaged hoses. Ensure all connections are secure.

  2. Valve Stem Seal Replacement:

    • Remove the valve cover and replace valve stem seals. This requires compressing the valve springs and removing the valve keepers, so specialized tools may be needed.

  3. Piston Ring Replacement:

    • If piston rings are worn, this requires engine disassembly. Remove the engine and separate the cylinder head, oil pan, and pistons.
    • Replace the piston rings and hone the cylinder walls. Reassemble the engine with new gaskets and seals.

  4. Gasket and Seal Replacement:

    • Replace any gaskets and seals that show signs of leakage. Use a torque wrench to ensure all bolts are tightened to the manufacturer’s specifications.

  5. Reassembly and Final Checks:

    • Reassemble the engine components, ensuring all connections are secure. Refill with new oil and coolant.
    • Start the engine and check for any leaks or abnormal noises. Monitor oil levels over the next few weeks to ensure the issue is resolved.
Conclusion:

By systematically diagnosing and addressing the root cause of high oil consumption in the Audi A6 C7, you can effectively resolve the issue. Regular maintenance and monitoring can help prevent recurrence and ensure the longevity of the engine.