how to reset the oil service light on BMW 3 Series F30/F31 (2012-2019)

BMW 3 Series F30/F31 (2012-2019)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

363 words

Problem Statement

The oil service light on a BMW 3 Series F30/F31 (2012-2019) needs to be reset after an oil change.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and in a safe condition before performing the reset.

Symptoms

•Oil service light illuminated on the dashboard
•Oil change has been performed recently
•Engine oil level is within normal range

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is turned off.
2
Insert the key fob into the ignition or press the start button without starting the engine.
3
Press the gas pedal fully down three times within 10 seconds.
4
Check the dashboard for the oil service light; it should be flashing or turning off.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner (optional)
•Owner's manual (for reference)

Parts Required

•No parts required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is turned off.
2
Insert the key fob into the ignition or press the start button without starting the engine.
3
Press the gas pedal fully down three times within 10 seconds.
4
Check the dashboard for the oil service light; it should be flashing or turning off.

Solution

1. Preparation

Gather necessary tools: OBD-II scanner (if needed) and owner's manual.
Ensure the vehicle is in park (P) or neutral (N).

2. Access the Ignition

Insert the key fob into the ignition or press the start button to get to the accessory position without starting the engine.

3. Reset the Oil Service Light

Press and hold the trip reset button on the instrument cluster.
While holding the trip reset button, turn the ignition to the "On" position (do not start the engine).
Continue holding the trip reset button until the oil service light starts to flash and then goes out.
Release the trip reset button.

4. Confirm Reset

Turn off the ignition and then turn it back on to verify that the oil service light is no longer illuminated.