how to reset the oil service light on my BMW 3 Series F30/F31 (2012-2019)

BMW 3 Series F30/F31 (2012-2019)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

3 min read

423 words

Problem Statement

The oil service light on your BMW 3 Series F30/F31 (2012-2019) needs to be reset after an oil change or routine maintenance.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked safely and the engine is off while performing the reset.

Symptoms

•Oil service light illuminated on the dashboard
•Notification of upcoming service due on the display
•Engine running smoothly but requires maintenance acknowledgment

Diagnostic Steps

1
Ensure the vehicle is in the "OFF" position and all doors are closed.
2
Insert the key fob into the ignition slot without starting the engine.
3
Press the start button briefly without pressing the brake pedal to turn the ignition to the "ON" position.
4
Observe the dashboard for the oil service light status.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key fob or ignition key

Parts Required

•None required for the reset process

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the "OFF" position and all doors are closed.
2
Insert the key fob into the ignition slot without starting the engine.
3
Press the start button briefly without pressing the brake pedal to turn the ignition to the "ON" position.
4
Observe the dashboard for the oil service light status.

Solution

1. Preparation

Gather necessary tools: Ignition key fob or key.
Ensure that the vehicle is parked on a level surface with the engine off.

2. Accessing the Oil Service Reset Function

Turn Ignition ON: Insert the key fob and press the start button without pressing the brake pedal to access the ignition in the "ON" position.
Access the Trip Computer: Using the stalk on the right side of the steering wheel, navigate to the "Service" menu on the dashboard display.
Select Engine Oil: Use the button on the stalk to scroll until "Engine Oil" is highlighted.

3. Resetting the Oil Service Light

Initiate Reset: Once "Engine Oil" is selected, press and hold the button on the stalk until the reset option appears.
Confirm Reset: Follow the prompts to confirm the reset by selecting "Reset" and pressing the button again to finalize the process.
Turn Ignition OFF: After confirmation, turn the ignition off completely.

4. Verify Reset

Turn Ignition ON Again: Repeat the process to turn the ignition back to the "ON" position.
Check Dashboard: Confirm that the oil service light no longer illuminates.