how to reset the tire pressure monitoring system on BMW 3 Series F30/F31 (2012-2019)?

BMW 3 Series F30/F31 (2012-2019)

Error Codes

15-30 minutes

Time

medium

Difficulty

medium

Severity

2 min read

397 words

Problem Statement

The Tire Pressure Monitoring System (TPMS) on a BMW 3 Series F30/F31 (2012-2019) needs to be reset, typically after adjusting tire pressures or replacing tires.

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always check tire pressures when tires are cold for accurate readings.

Symptoms

•TPMS warning light illuminated on the dashboard
•Inaccurate tire pressure readings displayed
•Warning message indicating low tire pressure
•Difficulty in resetting the TPMS with standard methods

Diagnostic Steps

1
Check the tire pressures of all tires, including the spare if equipped, to ensure they are at the manufacturer's recommended levels.
2
Ensure that the vehicle is in a stationary position and turned on, with the engine running.
3
Verify if the TPMS warning light is illuminated on the dashboard.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•BMW key fob
•Access to the vehicle's infotainment system

Parts Required

•None required for reset, but ensure proper tire inflation.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure all tires are inflated to the correct pressure.
Gather necessary tools: BMW key fob and access to the vehicle's infotainment system.

2. Resetting TPMS via iDrive

With the engine running, press the "Menu" button on the iDrive controller.
Select "Vehicle Information" from the menu.
Navigate to "Tire Pressure Monitor" or "TPMS."
Select "Reset" or "Reinitialize."
Confirm the reset by selecting "Yes" when prompted.

3. Resetting TPMS via Button (if equipped)

Locate the TPMS reset button, usually found under the steering column or near the driver's side door.
Press and hold the TPMS reset button until the TPMS warning light blinks and then turns off.
Release the button and wait for a moment to ensure the system recalibrates.

4. Drive the Vehicle

After resetting, drive the vehicle at speeds above 20 mph (32 km/h) for about 10 minutes to allow the TPMS to relearn the tire pressures.