how to reset the oil change light in BMW 3 Series G20/G21 (2019-2024)?

BMW 3 Series G20/G21 (2019-2024)

Error Codes

5-10 minutes

Time

medium

Difficulty

medium

Severity

3 min read

417 words

Problem Statement

The oil change light needs to be reset on a BMW 3 Series G20/G21 (2019-2024) after an oil change has been performed.

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and on a stable surface before performing the reset.

Symptoms

•Oil change light illuminated on the dashboard
•Message indicating the need for an oil change
•Service reminder notification appears

Diagnostic Steps

1
Ensure the vehicle is in a safe, stationary position with the engine off.
2
Insert the key fob into the ignition or have it in the vehicle.
3
Press the start/stop button without pressing the brake pedal to turn on the ignition (position 2).
4
Access the instrument cluster display using the steering wheel controls to navigate to the "Service" menu.
5
Select the "Oil Change" option to confirm the reset procedure.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required for the reset process.

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in a safe, stationary position with the engine off.
2
Insert the key fob into the ignition or have it in the vehicle.
3
Press the start/stop button without pressing the brake pedal to turn on the ignition (position 2).
4
Access the instrument cluster display using the steering wheel controls to navigate to the "Service" menu.
5
Select the "Oil Change" option to confirm the reset procedure.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Have the key fob ready and make sure the engine is off.

2. Ignition On

Press the start/stop button to turn on the ignition (do not start the engine).
Ensure the dashboard lights illuminate, indicating the vehicle is in the accessory position.

Use the left-hand steering wheel buttons to navigate to the “My Vehicle” or “Car” option on the display screen.
Scroll down to the "Vehicle Status" menu.

4. Reset Oil Change Light

In the "Vehicle Status" menu, select "Service Required."
Choose the "Oil Change" option.
Press and hold the button to confirm the reset when prompted.

5. Confirm Reset

Once the reset is completed, a confirmation message will appear on the display.
Turn off the ignition and then restart the vehicle to ensure the oil change light is no longer illuminated.