how to reset the oil light on BMW 3 Series G20/G21 (2019-2024)

BMW 3 Series G20/G21 (2019-2024)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

365 words

Problem Statement

The oil light on a BMW 3 Series G20/G21 (2019-2024) needs to be reset after an oil change or maintenance service.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the engine is off during the reset process to avoid accidental starting.

Symptoms

•Oil light remains illuminated on the dashboard
•Warning message indicating oil service required
•Engine oil change has been performed

Diagnostic Steps

1
Turn the ignition to the "ON" position without starting the engine.
2
Use the iDrive controller to navigate to the "Vehicle Info" menu.
3
Select "Vehicle Status" and then choose "Service Required".
4
Locate the "Engine Oil" option and select it.
5
Confirm the reset by selecting "Reset" when prompted.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•iDrive controller

Parts Required

•None required for the reset process

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Make sure the ignition is in the "ON" position.
Have the iDrive controller ready for navigation.

Use the iDrive controller to navigate:
- Press the "Menu" button on the controller.
- Scroll to "Vehicle Info" using the controller and select it.

3. Navigate to Service Information

In the "Vehicle Info" screen:
- Select "Vehicle Status".
- Scroll down to find "Service Required" and select it.

4. Reset the Oil Light

Find the "Engine Oil" section:
- Highlight the "Engine Oil" option.
Click on the "Reset" option:
- A confirmation message will appear.
Confirm the reset by selecting "Yes".

5. Complete the Process

After the reset is confirmed, exit the menu.
Turn off the ignition and restart the vehicle to ensure the oil light is off.