how to reset the oil light on my BMW 3 Series G20/G21 (2019-2024)

BMW 3 Series G20/G21 (2019-2024)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

389 words

Problem Statement

The oil light on a BMW 3 Series G20/G21 (2019-2024) needs to be reset after an oil change or maintenance service.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked securely and the engine is off before performing the reset.

Symptoms

•Oil light illuminated on the dashboard
•Service reminder for oil change displayed on the screen
•Warning message indicating low oil or oil service due

Diagnostic Steps

1
Ensure the vehicle is in the "On" position without starting the engine.
2
Press the "Start/Stop" button without pressing the brake pedal to enter the accessory mode.
3
Navigate to the "My Vehicle" menu on the iDrive screen.
4
Select "Vehicle Status" and then "Service Required."
5
Confirm the oil change service has been completed before proceeding.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•BMW key fob

Parts Required

•None required for the reset procedure

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the "On" position without starting the engine.
2
Press the "Start/Stop" button without pressing the brake pedal to enter the accessory mode.
3
Navigate to the "My Vehicle" menu on the iDrive screen.
4
Select "Vehicle Status" and then "Service Required."
5
Confirm the oil change service has been completed before proceeding.

Solution

1. Preparation

Gather required tools such as the vehicle key fob.
Ensure the vehicle is parked on a level surface and the engine is off.
Safety warning: Ensure the vehicle is in park mode and the parking brake is engaged.

Turn the ignition to the "On" position (do not start the engine).
Press the "Start/Stop" button to set it to accessory mode.
Use the iDrive controller to navigate to "My Vehicle" on the main menu.

3. Resetting the Oil Light

Select "Vehicle Status" from the menu.
Choose "Service Required."
Scroll down to "Engine Oil" and press the iDrive controller.
Select "Reset" to confirm the oil service reset.
A confirmation message will appear; select "Yes" to finalize the reset.

4. Verify the Reset

Turn off the ignition and then restart the vehicle.
Check the dashboard to ensure the oil light is no longer illuminated.