how to reset the oil light on my BMW 3 Series G20/G21 (2019-2024)

BMW 3 Series G20/G21 (2019-2024)

Error Codes

5-10 minutes

Time

medium

Difficulty

medium

Severity

2 min read

371 words

Problem Statement

The oil light on a BMW 3 Series G20/G21 (2019-2024) needs to be reset following an oil change or maintenance service.

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe, stationary position before attempting the reset.

Symptoms

•Oil service light illuminated on the dashboard
•Notification of oil service overdue
•Engine oil change has been performed but light remains on

Diagnostic Steps

1
Ensure the vehicle is in the "Off" position and all doors are closed.
2
Insert the key fob into the ignition without starting the engine.
3
Press the start/stop button without pressing the brake pedal to access the ignition on position.
4
Navigate to the "Settings" menu on the instrument cluster display using the controls on the steering wheel.
5
Select "Vehicle Information" followed by "Vehicle Status".
6
Choose "Engine Oil" and then select the option to reset the oil service indicator.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for the reset process.

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the "Off" position and all doors are closed.
2
Insert the key fob into the ignition without starting the engine.
3
Press the start/stop button without pressing the brake pedal to access the ignition on position.
4
Navigate to the "Settings" menu on the instrument cluster display using the controls on the steering wheel.
5
Select "Vehicle Information" followed by "Vehicle Status".
6
Choose "Engine Oil" and then select the option to reset the oil service indicator.

Solution

1. Preparation

Ensure the vehicle is parked on a flat surface.
Gather the key fob and ensure the engine is off.

2. Access Ignition Position

Insert the key fob into the ignition slot.
Press the start/stop button without pressing the brake pedal.

3. Navigate to Reset Option

Use the steering wheel controls to scroll through the instrument cluster display.
Select the "Settings" option.
Scroll to "Vehicle Information".

4. Reset Oil Service Indicator

Go to "Vehicle Status".
Select "Engine Oil".
Follow the prompt to reset the oil service indicator.
Confirm the reset when prompted.

5. Turn Off Ignition

Press the start/stop button once to turn the ignition off.