how to fix P0011 timing code in BMW 5 Series F10/F11 (2010-2017)

Solution

1. Preparation

• Gather tools and parts needed.
• Disconnect the battery to ensure safety.
• Allow the engine to cool before working on it.

2. Replace VVT Solenoid

1. Locate the VVT solenoid on the engine (usually near the camshaft cover).
2. Disconnect the electrical connector from the solenoid.
3. Remove the mounting bolts using a socket set.
4. Carefully pull the solenoid out of its housing.
5. Apply clean engine oil to the O-ring of the new solenoid.
6. Install the new VVT solenoid and secure it with mounting bolts (torque to manufacturer's specifications).
7. Reconnect the electrical connector.

3. Change Engine Oil and Filter

1. Drain the engine oil by removing the oil drain plug.
2. Replace the oil filter using an oil filter wrench.
3. Reinstall the drain plug and torque to specifications.
4. Fill the engine with new oil that meets BMW specifications (check owner's manual for correct type and quantity).

4. Clear Codes and Test

1. Reconnect the battery.
2. Use an OBD-II scanner to clear the P0011 code.
3. Start the engine and let it idle for a few minutes to ensure proper operation.
4. Take the vehicle for a test drive under various driving conditions.