how to fix P0302 code in BMW 5 Series F10/F11 (2010-2017)

BMW 5 Series F10/F11 (2010-2017)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

Error Code: P0302

3 min read

533 words

Problem Statement

The P0302 trouble code indicates a misfire in cylinder 2 of a BMW 5 Series F10/F11 (2010-2017). This code can lead to poor engine performance, increased emissions, and potential e

Error Code

P0302

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening any components.

Symptoms

•Check engine light illuminated
•Rough idle or engine shaking
•Decreased engine power
•Poor fuel economy
•Engine stalling or hesitation during acceleration

Diagnostic Steps

1
Scan the vehicle's computer using an OBD-II scanner to confirm the P0302 code and check for any additional codes.
2
Inspect the ignition coil and spark plug in cylinder 2 for signs of wear or damage.
3
Test the resistance of the ignition coil using a multimeter to ensure it is within specification.
4
Check the fuel injector for cylinder 2 for proper operation and blockage.
5
Perform a compression test on cylinder 2 to check for mechanical issues.
6
Inspect the wiring and connectors leading to the ignition coil and fuel injector for damage or corrosion.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Multimeter
•Torque wrench
•Spark plug socket

Parts Required

•Spark plug (for cylinder 2)
•Ignition coil (if faulty)
•Fuel injector (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's computer using an OBD-II scanner to confirm the P0302 code and check for any additional codes.
2
Inspect the ignition coil and spark plug in cylinder 2 for signs of wear or damage.
3
Test the resistance of the ignition coil using a multimeter to ensure it is within specification.
4
Check the fuel injector for cylinder 2 for proper operation and blockage.
5
Perform a compression test on cylinder 2 to check for mechanical issues.
6
Inspect the wiring and connectors leading to the ignition coil and fuel injector for damage or corrosion.

Solution

1. Preparation

Gather tools and parts required for the repair.
Ensure the vehicle is parked on a level surface, and the engine is cool before beginning work.
Disconnect the negative battery terminal.

2. Inspect and Replace Spark Plug

Remove the ignition coil from cylinder 2:
- Unplug the electrical connector from the ignition coil.
- Remove the bolt securing the ignition coil using a socket wrench.
- Gently pull the ignition coil out of the spark plug well.
Remove the spark plug:
- Use a spark plug socket to carefully unscrew and remove the spark plug from cylinder 2.
Inspect the spark plug for wear, deposits, or damage. Replace if necessary with the manufacturer's recommended spark plug.

3. Inspect and Replace Ignition Coil

If the ignition coil is faulty:
- Install the new ignition coil into cylinder 2.
- Secure it with the bolt and reconnect the electrical connector.

4. Inspect and Clean Fuel Injector

If the fuel injector is not functioning properly:
- Disconnect the electrical connector from the fuel injector.
- Remove the fuel injector using the appropriate tool.
- Clean or replace the fuel injector as necessary.

5. Reassembly

Reinstall the spark plug and ignition coil in the correct order.
Reconnect the negative battery terminal.
Start the engine and allow it to reach operating temperature.