how to replace the windshield wipers on my BMW 5 Series F10/F11 (2010-2017)?

BMW 5 Series F10/F11 (2010-2017)

Error Codes

30 minutes

Time

medium

Difficulty

medium

Severity

3 min read

446 words

Problem Statement

The windshield wipers on a BMW 5 Series F10/F11 (2010-2017) are worn out or damaged, necessitating replacement for optimal visibility during rainy conditions.

Estimated Time

30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is off and parked securely before starting the replacement.

Symptoms

•Wipers leave streaks or smears on the windshield.
•Wipers skip or chatter during operation.
•Rubber blades are cracked or torn.
•Wipers do not make proper contact with the windshield.
•Wipers are noisy when in use.

Diagnostic Steps

1
Inspect the wiper blades visually for signs of wear or damage.
2
Check the wiper arm movement to ensure it operates smoothly.
3
Test the wiper function at different speeds to evaluate performance.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Flathead screwdriver (if needed for release tab)
•Clean cloth for windshield cleaning

Parts Required

•New wiper blades (specific to BMW 5 Series F10/F11)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface and the engine is off.
Disconnect the battery to prevent any electrical issues while working.

2. Lift the Wiper Arms

Gently lift the wiper arms away from the windshield until they lock into a vertical position.
Ensure the arms are held securely to prevent them from snapping back.

3. Remove the Old Wiper Blades

Locate the release tab on the wiper blade where it attaches to the wiper arm.
Press the release tab and slide the wiper blade off the arm.
Repeat for the other wiper blade.

4. Install New Wiper Blades

Take the new wiper blade and align it with the wiper arm.
Slide the blade onto the arm until it clicks into place, ensuring the release tab locks securely.
Repeat for the other wiper blade.

5. Lower the Wiper Arms

Carefully lower the wiper arms back to their resting position on the windshield.
Ensure both wipers sit evenly against the glass.

6. Final Check

Reconnect the battery.
Turn on the ignition and test the wipers to verify they function properly without any noise or skipping.