how to reset the oil light on my BMW 5 Series F10/F11 (2010-2017)

BMW 5 Series F10/F11 (2010-2017)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

381 words

Problem Statement

The oil light on a BMW 5 Series F10/F11 (2010-2017) remains illuminated, indicating the need for an oil change or maintenance reset.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and in park mode before performing the reset.

Symptoms

•Oil light remains on after oil change
•Dashboard warning message indicating service required
•Engine oil level low warning (if applicable)
•Engine performance issues related to oil maintenance

Diagnostic Steps

1
Ensure the engine oil has been changed and the correct oil level is set.
2
Insert the key fob into the ignition (do not start the engine).
3
Press the start/stop button without pressing the brake pedal to enter the accessory mode.
4
Using the iDrive controller, navigate to "My Vehicle" > "Vehicle Status" > "Service Required".
5
Check if the oil change interval is displayed and select it.
6
Follow on-screen prompts to reset the oil light.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•BMW key fob
•iDrive controller (in-built)

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the engine oil has been changed and the correct oil level is set.
2
Insert the key fob into the ignition (do not start the engine).
3
Press the start/stop button without pressing the brake pedal to enter the accessory mode.
4
Using the iDrive controller, navigate to "My Vehicle" > "Vehicle Status" > "Service Required".
5
Check if the oil change interval is displayed and select it.
6
Follow on-screen prompts to reset the oil light.

Solution

1. Preparation

Gather necessary tools: BMW key fob, iDrive controller.
Ensure the vehicle is parked on a level surface.

2. Access the Vehicle Status

Insert the key fob into the ignition.
Press the start/stop button without pressing the brake pedal to turn on the electrical system.

Use the iDrive controller to select "My Vehicle".
Scroll down and select "Vehicle Status".
Choose "Service Required" to view the oil change interval.

4. Reset the Oil Light

Highlight the oil change option in the service menu.
Press and hold the iDrive controller button to select the reset option.
Confirm the reset when prompted by selecting "Yes".

5. Complete the Process

Turn off the ignition completely.
Remove the key fob from the ignition.