how to reset the oil service light on my BMW 5 Series F10/F11 (2010-2017)

BMW 5 Series F10/F11 (2010-2017)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

362 words

Problem Statement

The oil service light on a BMW 5 Series F10/F11 (2010-2017) needs to be reset after an oil change or maintenance service.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in "Park" mode or securely on a flat surface when performing any resets.

Symptoms

•Oil service light illuminated on the dashboard
•Message indicating "Service Due" or "Oil Service" on the display
•No other performance issues related to the engine

Diagnostic Steps

1
Ensure the vehicle is in a stationary position with the engine turned off.
2
Insert the key fob into the ignition or press the start button without starting the engine.
3
Access the vehicle's onboard computer system using the iDrive controller.
4
Navigate to the "Service" menu on the display screen.
5
Select the "Oil" section to find the oil service reset option.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•BMW key fob

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in a stationary position with the engine turned off.
2
Insert the key fob into the ignition or press the start button without starting the engine.
3
Access the vehicle's onboard computer system using the iDrive controller.
4
Navigate to the "Service" menu on the display screen.
5
Select the "Oil" section to find the oil service reset option.

Solution

1. Preparation

Ensure the ignition is in the "On" position and the engine is off.
Have the vehicle key fob ready.

2. Access iDrive System

Use the iDrive controller to navigate to the "Main Menu."
Scroll down to select "Vehicle Information" or "Car."
Locate the "Service" option within the menu.

3. Reset Oil Service Light

Select the "Engine Oil" or "Oil Service" option from the Service menu.
Press and hold the "Reset" button (this may be labeled as "Reset" or "Perform Reset").
Confirm the reset action when prompted by the system.

4. Verify Reset

Exit the menu and turn off the ignition.
Restart the engine to verify that the oil service light is no longer illuminated.