how to reset the service light on a BMW 5 Series F10/F11 (2010-2017)

BMW 5 Series F10/F11 (2010-2017)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

370 words

Problem Statement

The service light on a BMW 5 Series F10/F11 (2010-2017) needs to be reset after completing a maintenance service.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and secured before performing the reset.

Symptoms

•Service light illuminated on the dashboard
•Warning message indicating service is due
•Engine oil service indicator active
•Inspection service reminder active

Diagnostic Steps

1
Insert the key fob into the ignition or press the start button without pressing the brake pedal.
2
Access the vehicle's onboard computer by navigating to the "Service" menu on the dashboard display.
3
Check the current service status to confirm the service light is on.
4
Verify that all required service has been performed prior to resetting the light.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key fob

Parts Required

•N/A (no parts are required for this procedure)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Insert the key fob into the ignition or press the start button without pressing the brake pedal.
2
Access the vehicle's onboard computer by navigating to the "Service" menu on the dashboard display.
3
Check the current service status to confirm the service light is on.
4
Verify that all required service has been performed prior to resetting the light.

Solution

1. Preparation

Ensure the vehicle is in a safe location with the engine off.
Gather the necessary tools: key fob.

Turn the ignition to the "ON" position without starting the engine (do not press the brake pedal).
Use the "BC" button on the turn signal lever to scroll through the menu until you reach the "Vehicle Information" section.
Select "Service Required" or "Service History" to access the service menu.

3. Reset the Service Light

Once in the "Service" menu, highlight the service that needs to be reset (e.g., "Engine Oil," "Brake Fluid," "Inspection").
Press and hold the "BC" button for approximately 3 seconds until the reset option appears.
Confirm the reset by selecting "Yes" when prompted.

4. Verify the Reset

Turn off the ignition.
Restart the vehicle to ensure the service light is no longer illuminated.