how to reset the service light on BMW 5 Series F10/F11 (2010-2017)

BMW 5 Series F10/F11 (2010-2017)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

3 min read

444 words

Problem Statement

The service light on a BMW 5 Series (F10/F11, 2010-2017) needs to be reset after maintenance or service has been performed.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in "Park" or "Neutral" before starting the reset process to prevent any unintended movement.

Symptoms

•Service light illuminated on the dashboard
•Notification of service due message on the display
•Service interval countdown not resetting after maintenance

Diagnostic Steps

1
Ensure the vehicle is in the "OFF" position, and the key fob is present.
2
Insert the key fob into the ignition slot or press the start button without pressing the brake to turn on the electronics.
3
Access the vehicle's instrument cluster display by navigating using the trip computer button on the turn signal lever.
4
Check that the service light is still illuminated before starting the reset procedure.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•No special tools required, only the vehicle's key fob.

Parts Required

•No parts required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the "OFF" position, and the key fob is present.
2
Insert the key fob into the ignition slot or press the start button without pressing the brake to turn on the electronics.
3
Access the vehicle's instrument cluster display by navigating using the trip computer button on the turn signal lever.
4
Check that the service light is still illuminated before starting the reset procedure.

Solution

1. Preparation

Ensure the vehicle is parked safely and on a level surface.
Gather tools such as the key fob for the ignition.

2. Ignition On

Insert the key fob into the ignition slot.
Turn the ignition to position "1" (first click) or press the start button without pressing the brake pedal to activate the electronics without starting the engine.

Use the trip computer button on the turn signal stalk to navigate through the onboard computer menu.
Press and hold the trip computer button until the "Service" menu appears on the display.

4. Reset the Service Light

Select the appropriate service item (e.g., Engine Oil, Brake Fluid, etc.) that you wish to reset.
Press and hold the trip computer button until the reset option appears (usually "Reset").
Confirm the reset when prompted by selecting "Yes" using the trip computer button.

5. Turn Off Ignition

Turn the ignition back to the "OFF" position.
Wait for a few seconds.

6. Verify Reset

Restart the vehicle and check that the service light is no longer illuminated.