how to reset the service reminder in BMW 5 Series F10/F11 (2010-2017)?

BMW 5 Series F10/F11 (2010-2017)

Error Codes

15-30 minutes

Time

medium

Difficulty

medium

Severity

2 min read

398 words

Problem Statement

The service reminder in a BMW 5 Series F10/F11 (2010-2017) needs to be reset after maintenance has been performed.

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and in a safe environment while performing this procedure.

Symptoms

•Service light illuminated on the dashboard
•Incorrect service interval displayed
•Reminder notification when starting the vehicle

Diagnostic Steps

1
Ensure the vehicle is in the "OFF" position.
2
Insert the key fob or remote into the ignition slot.
3
Press the start/stop button without pressing the brake pedal to enter the accessory mode.
4
Navigate to the "Settings" menu on the dashboard display.
5
Access the "Service" menu to view current service status.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ensure that the vehicle is parked on a level surface and the engine is turned off.

Parts Required

•No parts are required for this procedure

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the "OFF" position.
2
Insert the key fob or remote into the ignition slot.
3
Press the start/stop button without pressing the brake pedal to enter the accessory mode.
4
Navigate to the "Settings" menu on the dashboard display.
5
Access the "Service" menu to view current service status.

Solution

1. Preparation

Tools Required: No special tools needed
Ensure that the vehicle is parked on a level surface and the engine is turned off.

Turn the ignition to the "ON" position by pressing the start/stop button (without pressing the brake pedal).
Use the iDrive controller to navigate to the "My Vehicle" menu.
Select "Vehicle Status" from the menu options.
Choose "Service Required" to access the service reminder settings.

3. Reset the Service Reminder

Highlight the service reminder you wish to reset (e.g., Engine Oil, Brake Fluid, etc.).
Press the iDrive controller to select the highlighted service.
Choose the option to "Reset" or "Reset Service Interval" when prompted.
Confirm the reset by selecting "Yes" when the confirmation message appears.
Exit the menu once the reset is complete.

4. Verify Reset

Turn off the ignition and wait a few moments.
Restart the vehicle to check if the service reminder light is no longer illuminated.