how to reset the tire pressure light on BMW 5 Series F10/F11 (2010-2017)

BMW 5 Series F10/F11 (2010-2017)

Error Codes

30 minutes

Time

medium

Difficulty

medium

Severity

3 min read

468 words

Problem Statement

The tire pressure warning light is illuminated on a BMW 5 Series F10/F11 (2010-2017), indicating that the tire pressure monitoring system (TPMS) needs to be reset after adjusting

Estimated Time

30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked on a level surface before checking tire pressures.

Symptoms

•Tire pressure warning light illuminated on the dashboard
•Incorrect tire pressure readings displayed
•Light remains on even after correcting tire pressures
•Potential for reduced fuel efficiency due to improper tire pressure
•Warning message on the instrument cluster regarding tire pressure

Diagnostic Steps

1
Check the tire pressures using a tire pressure gauge to ensure they are at the recommended levels.
2
Verify that all tires, including the spare if equipped with TPMS, are properly inflated.
3
Ensure there are no punctures or leaks in the tires that might affect pressure readings.
4
Confirm that the TPMS sensors are functioning properly; this may involve using a diagnostic tool to check for error codes related to TPMS.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•BMW key fob or ignition key

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the tire pressures using a tire pressure gauge to ensure they are at the recommended levels.
2
Verify that all tires, including the spare if equipped with TPMS, are properly inflated.
3
Ensure there are no punctures or leaks in the tires that might affect pressure readings.
4
Confirm that the TPMS sensors are functioning properly; this may involve using a diagnostic tool to check for error codes related to TPMS.

Solution

1. Preparation

Ensure all tires are inflated to the manufacturer's recommended pressure (found on the driver’s door jamb).
Have the vehicle keys ready and be seated inside the vehicle.

2. Turn on the Ignition

Insert the key fob into the ignition slot or press the start button without pressing the brake pedal.
Turn the ignition to the "On" position without starting the engine.

Use the iDrive controller (if equipped) to navigate to the following:
- Select "Vehicle Information" from the home screen.
- Scroll to "Vehicle Status."
- Choose "Tire Pressure Monitor."

4. Reset the Tire Pressure Monitoring System

In the Tire Pressure Monitor menu, select "Reset" or "Initialize."
Confirm the reset when prompted on the screen.

5. Turn Off the Ignition

Turn the ignition off and remove the key or press the stop button.

6. Test the System

Start the vehicle and check if the tire pressure warning light has turned off.
Drive the vehicle for a few minutes to allow the system to recalibrate.