FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my BMW 5 Series F10/F11 (2010-2017) has poor fuel economy, what should I check? - BMW 5 Series
Home/Cars/BMW/5 Series/F10/F11 (2010-2017)/my BMW 5 Series F10/F11 (2010-2017) has poor fuel economy, what should I check?

my BMW 5 Series F10/F11 (2010-2017) has poor fuel economy, what should I check?

BMW 5 Series F10/F11 (2010-2017)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
537 words

Problem Statement

The BMW 5 Series F10/F11 (2010-2017) is experiencing poor fuel economy, indicating potential underlying issues affecting engine performance and efficiency.

Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical components.
  • •Allow the engine to cool before inspecting or replacing components.

Symptoms

  • •Check engine light illuminated
  • •Decreased miles per gallon (MPG)
  • •Engine stalling or rough idle
  • •Unusual exhaust odors (e.g., rich fuel smell)
  • •Increased engine noise
  • •Poor acceleration response

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Fuel pressure gauge
  • •Screwdrivers (flathead and Torx)
  • •Tire pressure gauge
  • •MAF cleaner spray

Parts Required

  • •New air filter
  • •New MAF sensor (if needed)
  • •Replacement vacuum hoses (if damaged)

Additional Information

Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all necessary tools and parts.
  • Ensure the vehicle is parked on a flat surface and the engine is cool.
  • Disconnect the battery to prevent electrical shorts.
2. Inspect and Replace Air Filter
  • Locate the air filter housing.
  • Open the housing by removing clips or screws (tools: screwdriver).
  • Remove the old air filter and inspect for dirt or blockages.
  • Install the new air filter, ensuring it fits snugly in the housing.
  • Reassemble the air filter housing.
3. Clean or Replace MAF Sensor
  • Locate the MAF sensor in the intake duct.
  • Remove the electrical connector and screws securing the sensor (tools: Torx screwdriver).
  • Clean the sensor using MAF cleaner spray. Do not touch the sensor elements with fingers.
  • If cleaning does not improve performance, replace with a new MAF sensor.
4. Check and Adjust Tire Pressure
  • Use a tire pressure gauge to check the tire pressure.
  • Inflate tires to the recommended pressure levels specified in the owner’s manual.
  • Inspect tires for uneven wear or damage and replace if necessary.
5. Inspect for Vacuum Leaks
  • Visually inspect all vacuum hoses for cracks or disconnections.
  • Use a smoke machine or carburetor cleaner to check for leaks while the engine is running.
  • Replace any damaged hoses or seals found during inspection.