how do I reset the tire pressure monitoring system in my BMW 5 Series G30/G31 (2017-2024)?

BMW 5 Series G30/G31 (2017-2024)

Error Codes

10-20 minutes

Time

medium

Difficulty

medium

Severity

2 min read

394 words

Problem Statement

The tire pressure monitoring system (TPMS) in a BMW 5 Series G30/G31 (2017-2024) needs to be reset, likely due to a tire change, pressure adjustment, or malfunction.

Estimated Time

10-20 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is on a flat surface while performing the reset to avoid errors in tire pressure detection.

Symptoms

•TPMS warning light on the dashboard
•Inaccurate tire pressure readings displayed
•Warning message regarding tire pressure on the infotainment screen
•Potentially uneven tire wear due to incorrect pressure

Diagnostic Steps

1
Inspect all tires to ensure they are properly inflated to the recommended pressure.
2
Check for any visible damage or leaks in the tires.
3
Ensure the spare tire (if equipped) is also properly inflated.
4
Verify that the TPMS sensors are functioning and have not been damaged.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•BMW key fob
•OBD-II scanner (optional)

Parts Required

•None required for reset

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure all tires are inflated to the manufacturer's recommended pressure, which can be found on the driver's side door jamb.
Gather necessary tools: BMW key fob, and an OBD-II scanner (if needed for advanced reset).

2. Resetting the TPMS via iDrive

Turn on the vehicle without starting the engine by pressing the Start/Stop button once.
Navigate to the main menu on the iDrive display screen.
Select "Vehicle Info" or "Settings" (depending on software version).
Choose "Tire Pressure Monitor" or "TPM".
Select "Reset" or "Initialize" to start the TPMS reset process.
Confirm the reset when prompted.

3. Manual Reset (if necessary)

If the iDrive method does not work:

Turn off the engine.
Unplug the negative battery terminal and wait for approximately 10 minutes to reset the system.
Reconnect the negative battery terminal.
Start the vehicle and repeat the iDrive reset steps.