FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix a BMW 5 Series G30/G31 (2017-2024) that hesitates when accelerating - BMW 5 Series
Home/Cars/BMW/5 Series/G30/G31 (2017-2024)/how to fix a BMW 5 Series G30/G31 (2017-2024) that hesitates when accelerating

how to fix a BMW 5 Series G30/G31 (2017-2024) that hesitates when accelerating

BMW 5 Series G30/G31 (2017-2024)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
529 words

Problem Statement

The BMW 5 Series G30/G31 (2017-2024) is experiencing hesitation during acceleration, which may indicate underlying issues with the engine, fuel system, or transmission.

Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems.
  • •Relieve fuel system pressure before servicing fuel components.
  • •Allow the engine to cool before working on engine components.

Symptoms

  • •Hesitation or stuttering during acceleration
  • •Check engine light illuminated
  • •Poor fuel economy
  • •Rough idle
  • •Engine misfires
  • •Unusual engine noises, such as knocking

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Throttle body cleaner
  • •Spark plug socket
  • •Fuel pressure gauge
  • •Fuel line disconnect tool

Parts Required

  • •Spark plugs
  • •Ignition coils (if faulty)
  • •Fuel filter (if applicable)
  • •Throttle body gasket (if needed)

Additional Information

Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
6 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all necessary tools and parts.
  • Disconnect the negative battery terminal to ensure safety during repairs.
2. Inspect and Clean the Throttle Body
  • Remove the air intake duct connecting to the throttle body using a socket set.
  • Clean the throttle body using throttle body cleaner and a soft cloth.
  • Inspect the throttle plate for proper movement and functionality.
  • Reinstall the air intake duct and reconnect any sensors.
3. Replace Spark Plugs
  • Remove the engine cover if applicable.
  • Disconnect the ignition coil connectors and unscrew the ignition coils.
  • Remove the old spark plugs using a spark plug socket and ratchet.
  • Install new spark plugs, ensuring they are gapped correctly to manufacturer specifications. Torque to 22 lb-ft (30 Nm).
  • Reinstall the ignition coils and connect the electrical plugs.
4. Check and Replace Fuel Filter (if applicable)
  • Locate the fuel filter, typically found along the fuel line near the fuel tank.
  • Relieve fuel system pressure by removing the fuel pump fuse and running the engine until it stalls.
  • Disconnect fuel lines from the filter using appropriate tools (fuel line disconnect tool).
  • Install the new fuel filter, ensuring proper orientation and connections.
  • Reinstall the fuel pump fuse, reconnect the battery, and check for leaks.