how to replace the battery in my BMW 5 Series G30/G31 (2017-2024) key fob

BMW 5 Series G30/G31 (2017-2024)

Error Codes

15-30 minutes

Time

medium

Difficulty

medium

Severity

3 min read

431 words

Problem Statement

The issue involves replacing the battery in a BMW 5 Series G30/G31 key fob from the model years 2017 to 2024.

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Be cautious not to damage the internal components while opening the key fob.

Symptoms

•Key fob not responding to buttons
•Intermittent or weak signal from key fob
•Difficulty in locking or unlocking the vehicle
•Warning message on the dashboard about key fob battery

Diagnostic Steps

1
Verify the key fob is the issue by attempting to use a spare fob if available.
2
Check for any visible damage to the key fob casing or buttons.
3
Confirm that the vehicle's battery is charged and functioning properly.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Small flathead screwdriver or key fob opening tool

Parts Required

•CR2032 battery (or appropriate replacement battery based on the key fob model)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather tools: a small flathead screwdriver or a key fob opening tool.
Ensure you are in a clean, well-lit area to avoid losing small components.

2. Open the Key Fob

Use the flathead screwdriver to gently pry apart the key fob casing at the seam.
Start at one end and carefully work your way around to avoid damaging the casing.

3. Remove the Old Battery

Once the fob is opened, locate the battery.
Note the battery orientation (positive side facing up or down).
Carefully remove the old battery using your fingers or the flathead screwdriver.

4. Install the New Battery

Insert the new battery into the key fob, ensuring it is in the correct orientation as noted earlier.
Make sure the battery is seated firmly in place.

5. Reassemble the Key Fob

Align the two halves of the key fob casing.
Press them together firmly until you hear a click, indicating that the fob is securely closed.

6. Test the Key Fob

Test the key fob by pressing the buttons to ensure that it is functioning correctly.