how to reset maintenance light on BMW 5 Series (2010-2017)

BMW 5 Series G30/G31 (2017-2024)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

371 words

Problem Statement

The maintenance light on a BMW 5 Series (2010-2017) is illuminated, indicating that routine maintenance is required, and needs to be reset.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Potential notifications about upcoming service needed
•No performance issues or driving symptoms related to the vehicle's operation

Diagnostic Steps

1
Ensure the vehicle is in the "On" position without starting the engine.
2
Check the owner's manual for specific instructions related to the maintenance light reset.
3
Confirm that all maintenance tasks have been completed prior to resetting the light.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for the reset process.

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Have the key fob ready, and ensure it's functioning properly.
No special tools are required for this procedure.

2. Access the Ignition

Insert the key fob into the ignition slot or press the start button without pressing the brake pedal to enter the "On" mode.

3. Resetting the Maintenance Light

Step 1: Use the iDrive controller to navigate to the "Vehicle Info" option on the main menu.
Step 2: Select "Vehicle Status" and then choose "Service Required."
Step 3: Highlight the specific service that needs resetting, such as "Oil Service" or "Inspection."
Step 4: Press and hold the iDrive controller button until a confirmation message appears.
Step 5: Confirm the reset by selecting "Yes" when prompted.

4. Verifying the Reset

Turn off the ignition and then restart the vehicle to ensure the maintenance light is no longer illuminated.