how to reset oil change light on BMW 5 Series G30/G31 (2017-2024)

BMW 5 Series G30/G31 (2017-2024)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

383 words

Problem Statement

The oil change light on a BMW 5 Series G30/G31 (2017-2024) needs to be reset after an oil change service has been performed.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and in a safe location before performing resets.

Symptoms

•Oil change reminder light illuminated on the dashboard
•"Service Engine Soon" notification may appear
•Maintenance schedule indicator showing overdue service

Diagnostic Steps

1
Turn the ignition switch to the "On" position without starting the engine.
2
Press the gas pedal three times within 10 seconds.
3
Check the dashboard for the oil change light status.
4
If the light is still on, proceed to the vehicle settings using the iDrive system.
5
Navigate to "Vehicle Info" and then "Vehicle Status."
6
Select "Engine Oil" and check if a reset option is available.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required, but an iDrive controller is necessary for the software reset.

Parts Required

•None required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition switch to the "On" position without starting the engine.
2
Press the gas pedal three times within 10 seconds.
3
Check the dashboard for the oil change light status.
4
If the light is still on, proceed to the vehicle settings using the iDrive system.
5
Navigate to "Vehicle Info" and then "Vehicle Status."
6
Select "Engine Oil" and check if a reset option is available.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Have the vehicle in "On" position without starting the engine.
Gather the necessary tools (if any).

2. Reset via Ignition Method

Turn the ignition switch to the "On" position (do not start the engine).
Press the accelerator pedal three times quickly within 10 seconds.
Observe the dashboard for any changes in the oil change light status.
If the light goes off, the reset is successful. If not, proceed to the next step.

3. Reset via iDrive System

Start the vehicle or ensure it is in "On" mode.
Use the iDrive controller to navigate to "Car."
Select "Settings" and then "Service."
Choose "Service Required" and then "Engine Oil."
Follow prompts for resetting the oil change indicator.
Confirm the reset when prompted.