how to reset the oil light on BMW 5 Series G30/G31 (2017-2024)

BMW 5 Series G30/G31 (2017-2024)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

382 words

Problem Statement

The oil light on a 2017-2024 BMW 5 Series G30/G31 is illuminated and needs to be reset after an oil change or maintenance service.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and on a level surface before performing the reset.

Symptoms

•Oil light remains illuminated on the dashboard
•Message on the display indicating oil service is due
•Engine oil change performed recently

Diagnostic Steps

1
Verify that the oil change has been performed and the correct oil levels are maintained.
2
Ensure the ignition is in the ON position without starting the engine.
3
Check for any other warning lights or messages that may indicate additional issues.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key fob

Parts Required

•None required for this procedure

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface and the engine is off.
Gather the necessary tools: key fob and any necessary vehicle documentation for reference.

2. Access the iDrive System

Insert the key fob into the ignition slot or have it close to the vehicle if using Comfort Access.
Press the START/STOP button without pressing the brake pedal to turn on the ignition.

3. Navigate to Vehicle Status

Using the iDrive controller, navigate to the "Car" icon on the main menu.
Select "Vehicle Status" from the options presented.

4. Reset the Oil Light

In the "Vehicle Status" menu, select "Service Required."
Locate the "Engine Oil" option and select it.
Choose "Reset" to clear the oil change light.
Confirm the reset action when prompted by selecting "Yes."

5. Finalize

Turn off the ignition by pressing the START/STOP button.
Remove the key fob from the ignition slot if applicable.