how to reset the oil light on BMW 5 Series G30/G31 (2017-2024)

BMW 5 Series G30/G31 (2017-2024)

Error Codes

5-10 minutes

Time

medium

Difficulty

medium

Severity

2 min read

390 words

Problem Statement

The oil light on a BMW 5 Series G30/G31 (2017-2024) needs to be reset after an oil change or service.

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is stationary and in a safe environment when performing resets.

Symptoms

•Oil change indicator light illuminated on the dashboard
•Warning message regarding oil service due soon
•Vehicle prompts for service when starting

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is off.
2
Insert the key fob into the ignition slot or have the key in the vehicle.
3
Press the start/stop button without pressing the brake pedal to turn on the ignition (position 2).
4
Access the vehicle's on-board computer by navigating to the “Vehicle Information” menu on the dashboard.
5
Select “Service Required” or “Oil Change” from the menu options.
6
Follow on-screen prompts to reset the oil service indicator.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key fob

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is off.
2
Insert the key fob into the ignition slot or have the key in the vehicle.
3
Press the start/stop button without pressing the brake pedal to turn on the ignition (position 2).
4
Access the vehicle's on-board computer by navigating to the “Vehicle Information” menu on the dashboard.
5
Select “Service Required” or “Oil Change” from the menu options.
6
Follow on-screen prompts to reset the oil service indicator.

Solution

1. Preparation

Gather necessary tools: key fob, and ensure the vehicle is in a safe and level position.
Ensure the ignition is off before beginning the reset procedure.

2. Ignition On

Insert the key fob or ensure it is present in the vehicle.
Press the start/stop button without depressing the brake to power on the ignition.

Navigate using the iDrive controller to the “Vehicle Information” menu.
Select “Service Required” or “Oil Change” option.

4. Perform Reset

Once in the Oil Change menu, you will see the option to reset the oil service.
Confirm the reset by selecting the appropriate option and acknowledging any prompts.

5. Exit and Verify

Turn off the ignition and remove the key fob.
Restart the vehicle to check if the oil light has been reset successfully.