how to reset the oil service light in BMW 5 Series G30/G31 (2017-2024)?

BMW 5 Series G30/G31 (2017-2024)

Error Codes

5-10 minutes

Time

medium

Difficulty

medium

Severity

2 min read

331 words

Problem Statement

The oil service light in a BMW 5 Series G30/G31 (2017-2024) needs to be reset after an oil change or maintenance service.

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•None applicable for this reset procedure.

Symptoms

•Oil service light illuminated on the dashboard
•Reminder message indicating service is due
•Engine oil warning light may appear

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is turned off.
2
Insert the key fob into the ignition or press the start button without pressing the brake pedal to enter the accessory mode.
3
Access the vehicle's iDrive system by using the controller.
4
Navigate to "My Vehicle" on the main menu.
5
Select "Vehicle Status" and then "Service Required".

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•BMW key fob

Parts Required

•None required for reset

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is turned off.
2
Insert the key fob into the ignition or press the start button without pressing the brake pedal to enter the accessory mode.
3
Access the vehicle's iDrive system by using the controller.
4
Navigate to "My Vehicle" on the main menu.
5
Select "Vehicle Status" and then "Service Required".

Solution

1. Preparation

Ensure the vehicle is in ignition mode (accessory mode).
Have the vehicle's key fob ready.

From the iDrive main menu, scroll to "My Vehicle".
Select "Vehicle Status".
Choose "Service Required" to view the service reminders.

3. Reset the Oil Service Light

Highlight the "Oil Service" option in the service menu.
Press and hold the controller until the reset option appears.
Confirm the reset by selecting "Reset" when prompted.

Return to the main menu by pressing the "Back" button or the controller.
Turn off the ignition.