how to reset the oil service light in BMW 5 Series G30/G31 (2017-2024)

BMW 5 Series G30/G31 (2017-2024)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

374 words

Problem Statement

The oil service light in a BMW 5 Series G30/G31 (2017-2024) needs to be reset after an oil change or maintenance service.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in Park mode to prevent accidental movement during the process.

Symptoms

•Oil service light illuminated on the dashboard
•Reminder notifications for oil change appearing
•Engine oil level warnings (if applicable)
•Inability to reset the light through normal driving conditions

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is turned off.
2
Insert the key fob into the ignition slot (or press the start button without pressing the brake pedal).
3
Press the gas pedal fully three times within 10 seconds.
4
Observe the instrument cluster for changes (look for the oil service light).
5
If necessary, use the iDrive system to navigate to the vehicle settings and locate service intervals.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•BMW key fob

Parts Required

•None specifically for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is turned off.
2
Insert the key fob into the ignition slot (or press the start button without pressing the brake pedal).
3
Press the gas pedal fully three times within 10 seconds.
4
Observe the instrument cluster for changes (look for the oil service light).
5
If necessary, use the iDrive system to navigate to the vehicle settings and locate service intervals.

Solution

1. Preparation

Gather the necessary tools:
- BMW key fob
Ensure the vehicle is in Park mode and on a flat surface.

2. Access the Ignition

Insert the key fob into the ignition slot or have the key fob in the vehicle.
Do not start the engine.

3. Reset the Oil Service Light

Press the start/stop button once or turn the ignition to the ON position without starting the engine.
Immediately press the gas pedal fully three times within 10 seconds.
Observe the instrument cluster; the oil service light should flash and then turn off.

4. Confirm Reset

Turn off the ignition.
Start the engine to verify that the oil service light does not illuminate.