how to reset the oil service light on my BMW 5 Series G30/G31 (2017-2024)?

BMW 5 Series G30/G31 (2017-2024)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

3 min read

403 words

Problem Statement

The oil service light on a BMW 5 Series G30/G31 (2017-2024) needs to be reset after an oil change or service maintenance.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location and the engine is turned off when performing any checks or maintenance.

Symptoms

•Oil service light illuminated on the dashboard
•Message indicating the need for an oil change
•Inconsistent oil level readings
•Engine performance issues due to overdue oil change reminders (if ignored)

Diagnostic Steps

1
Turn the ignition key to the "ON" position without starting the engine.
2
Press the "Start/Stop" button to power up the vehicle if equipped with keyless entry.
3
Use the instrument cluster to navigate to the "Vehicle Information" menu.
4
Select "Vehicle Status" and then choose "Service Requirements."
5
Confirm the oil change message is displayed and verify the service interval.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required for the reset process

Parts Required

•None required for the reset process

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition key to the "ON" position without starting the engine.
2
Press the "Start/Stop" button to power up the vehicle if equipped with keyless entry.
3
Use the instrument cluster to navigate to the "Vehicle Information" menu.
4
Select "Vehicle Status" and then choose "Service Requirements."
5
Confirm the oil change message is displayed and verify the service interval.

Solution

1. Preparation

Ensure the vehicle is in a stationary position with the ignition in the "ON" position.
Have the vehicle in a safe environment with the parking brake engaged.

Press the "BC" button on the turn signal stalk to navigate through the options on the dashboard display until the "Service" menu appears.
Select "Engine Oil" to view the oil service status.

3. Reset the Oil Service Light

Press and hold the "BC" button until the "Reset" option appears on the screen.
Release the "BC" button, then press it again to confirm the reset.
A confirmation message will appear; select "Yes" to finalize the reset.

4. Confirmation of Reset

Turn the ignition off and then back on.
Check the dashboard to ensure the oil service light is no longer illuminated.