how to reset the oil service light on my BMW 5 Series G30/G31 (2017-2024)

BMW 5 Series G30/G31 (2017-2024)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

397 words

Problem Statement

The oil service light on a BMW 5 Series G30/G31 (2017-2024) needs to be reset after an oil change.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park or neutral and on a flat surface during the procedure.

Symptoms

•Oil service light illuminated on the dashboard
•Notification of oil change due on the display
•Engine performance issues if oil is not changed timely (not directly related to light reset)

Diagnostic Steps

1
Turn the ignition to the "ON" position without starting the engine.
2
Press the gas pedal fully three times within 10 seconds.
3
Check the instrument cluster for the oil service light indicator.
4
If the light is still on, navigate to the "Service" menu using the iDrive controller.
5
Select "Engine Oil" and confirm the reset option.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•BMW key fob
•iDrive controller

Parts Required

•None required for resetting the oil service light.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition to the "ON" position without starting the engine.
2
Press the gas pedal fully three times within 10 seconds.
3
Check the instrument cluster for the oil service light indicator.
4
If the light is still on, navigate to the "Service" menu using the iDrive controller.
5
Select "Engine Oil" and confirm the reset option.

Solution

1. Preparation

Gather necessary tools: BMW key fob, iDrive controller.
Ensure the vehicle is parked on a level surface.

2. Turn On the Ignition

Insert the key fob into the ignition slot.
Press the "Start/Stop" button once without pressing the brake pedal to turn on the electrical systems without starting the engine.

3. Use the Gas Pedal Method

Fully press the accelerator pedal three times within 10 seconds.
Observe the dashboard to see if the oil service light resets.

4. Using the iDrive System

Use the iDrive controller to navigate to the "Car" menu.
Select "Settings," then go to "Vehicle Status."
Choose "Service Required" and highlight "Engine Oil."
Select the option to reset the oil change interval and confirm your selection.

5. Confirmation

After resetting, turn off the ignition.
Start the engine to verify that the oil service light is no longer illuminated.