how to reset the service light in BMW 5 Series G30/G31 (2017-2024)

BMW 5 Series G30/G31 (2017-2024)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

379 words

Problem Statement

The service light on the BMW 5 Series G30/G31 (2017-2024) needs to be reset after performing maintenance or servicing.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location while performing the reset.
•Do not perform the reset while driving.

Symptoms

•Service indicator light illuminated on the dashboard
•Maintenance reminder notification is displayed
•Vehicle settings are unable to be altered due to service light

Diagnostic Steps

1
Ensure the vehicle is in "Park" and the ignition is off.
2
Insert the key fob into the ignition or have it present in the vehicle (for keyless start).
3
Press the "Start/Stop" button without pressing the brake pedal to turn on the ignition.
4
Navigate to the "Settings" menu using the iDrive controller.
5
Select "Vehicle Info" and then "Vehicle Status."
6
Choose "Service Required" to access the service light reset option.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required, as this process is done via the vehicle's onboard system.

Parts Required

•None required for the reset procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in "Park" and the ignition is off.
2
Insert the key fob into the ignition or have it present in the vehicle (for keyless start).
3
Press the "Start/Stop" button without pressing the brake pedal to turn on the ignition.
4
Navigate to the "Settings" menu using the iDrive controller.
5
Select "Vehicle Info" and then "Vehicle Status."
6
Choose "Service Required" to access the service light reset option.

Solution

Turn on the ignition by pressing the "Start/Stop" button without starting the engine.
Use the iDrive controller to navigate to the "Main Menu."
Select "Car" and then "Settings."

2. Reset the Service Light

In the "Settings" menu, select "Vehicle Info."
Choose "Vehicle Status" from the options.
Scroll to "Service Required" and select it.
Locate the specific service interval that needs resetting (e.g., oil change, brake fluid).
Confirm the reset by selecting the appropriate option (usually "Reset" or "Confirm").
Follow any prompts to finalize the reset.

3. Turn Off Ignition

Press the "Start/Stop" button to turn off the ignition.
Remove the key fob if applicable.