how to reset the service light on BMW 5 Series G30/G31 (2017-2024) after an oil change?

BMW 5 Series G30/G31 (2017-2024)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

367 words

Problem Statement

The service light on a BMW 5 Series G30/G31 (2017-2024) needs to be reset after an oil change to reflect the new service interval.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked in a safe, level area before starting the reset process.

Symptoms

•Service light illuminated on the dashboard
•Message indicating "Service Due" or "Oil Change Needed"
•No changes in engine performance or operation

Diagnostic Steps

1
Ensure the vehicle is in the "OFF" position with the key fob in your pocket or nearby.
2
Press the start/stop button without pressing the brake pedal to turn on the ignition (in "ON" position).
3
Use the vehicle's control screen to navigate to the "My Vehicle" menu.
4
Select "Vehicle Status" followed by "Service Required".
5
Confirm that the oil change has been performed and that you are ready to reset the service light.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•BMW key fob (for starting the vehicle)
•iDrive controller

Parts Required

•None specifically for the reset process

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the "OFF" position with the key fob in your pocket or nearby.
2
Press the start/stop button without pressing the brake pedal to turn on the ignition (in "ON" position).
3
Use the vehicle's control screen to navigate to the "My Vehicle" menu.
4
Select "Vehicle Status" followed by "Service Required".
5
Confirm that the oil change has been performed and that you are ready to reset the service light.

Solution

With the ignition in the "ON" position, press the “Menu” button on the iDrive controller.
Select “My Vehicle” from the main menu.
Go to “Vehicle Status”.

2. Reset the Service Light

In the “Vehicle Status” menu, select “Service Required”.
Highlight the “Engine Oil” option using the iDrive controller.
Press the option to reset (usually indicated with an option like "Reset" or an icon).
Confirm the reset when prompted on the screen.

3. Verify Reset

Turn off the ignition completely.
Start the vehicle and check if the service light is no longer illuminated.