FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my BMW 5 Series G30/G31 (2017-2024) makes a grinding noise when turning - BMW 5 Series
Home/Cars/BMW/5 Series/G30/G31 (2017-2024)/my BMW 5 Series G30/G31 (2017-2024) makes a grinding noise when turning

my BMW 5 Series G30/G31 (2017-2024) makes a grinding noise when turning

BMW 5 Series G30/G31 (2017-2024)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
500 words

Problem Statement

The BMW 5 Series G30/G31 (2017-2024) is experiencing a grinding noise when turning, which may indicate issues with the steering or suspension components.

Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before working on the power steering components.

Symptoms

  • •Grinding noise when turning the steering wheel
  • •Difficulty in steering or a feeling of resistance
  • •Vibration in the steering wheel during turns
  • •Unusual wear on tires
  • •Possible fluid leaks under the vehicle

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Socket set
  • •Torque wrench
  • •Power steering fluid
  • •Jack and jack stands
  • •Screwdrivers

Parts Required

  • •Power steering fluid
  • •Replacement tie rods or ball joints (if necessary)
  • •Power steering pump (if necessary)

Additional Information

Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a level surface, and the engine is off.
  • Disconnect the battery to avoid electrical issues.
2. Inspect Power Steering System
  • Sub-steps:
    • Locate the power steering reservoir and check fluid level.
    • If low, top off with manufacturer-recommended power steering fluid.
    • Inspect the reservoir for cracks or leaks.
    • If the fluid is contaminated, flush the power steering system.
3. Replace Worn Components
  • Sub-steps:
    • If any steering or suspension components are identified as defective (e.g., tie rods, ball joints), proceed with replacement:
      • Lift the vehicle using a jack and secure it with jack stands.
      • Remove the wheel to access steering components.
      • Use a socket set to detach the worn components.
      • Install new parts, ensuring to torque bolts to manufacturer specifications.
4. Test Power Steering Pump
  • Sub-steps:
    • Reconnect the battery.
    • Start the engine and turn the steering wheel from lock to lock to check for noise.
    • If noise persists, consider replacing the power steering pump:
      • Disconnect the power steering lines and electrical connector.
      • Remove mounting bolts and take out the pump.
      • Install the new pump, reconnect lines, and top off fluid.