FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my BMW 5 Series G30/G31 (2017-2024) starts slipping when accelerating what could be wrong - BMW 5 Series
Home/Cars/BMW/5 Series/G30/G31 (2017-2024)/my BMW 5 Series G30/G31 (2017-2024) starts slipping when accelerating what could be wrong

my BMW 5 Series G30/G31 (2017-2024) starts slipping when accelerating what could be wrong

BMW 5 Series G30/G31 (2017-2024)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
475 words

Problem Statement

The BMW 5 Series G30/G31 (2017-2024) is experiencing transmission slipping during acceleration, indicating potential issues with the transmission system.

Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before opening the transmission fluid access points.

Symptoms

  • •Slipping sensation when accelerating
  • •Engine revs increase without corresponding vehicle speed
  • •Delay in transmission engagement
  • •Unusual noises from the transmission (e.g., whining or grinding)
  • •Check engine light illuminated

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Fluid pump

Parts Required

  • •Transmission fluid
  • •Transmission filter
  • •Transmission control module (if required)

Additional Information

Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and the engine is cool.
  • Disconnect the negative battery terminal.
2. Check and Change Transmission Fluid
  • Sub-steps:
    1. Locate the transmission dipstick or access point.
    2. Remove the dipstick and wipe it clean; reinsert to check fluid level.
    3. If low, add the recommended transmission fluid (consult owner’s manual for specifications).
    4. If fluid is dirty or burnt, proceed to replace it.
    5. Drain the old transmission fluid by removing the drain plug (if applicable) or pan.
    6. Replace the transmission filter by removing the transmission pan and replacing the filter.
    7. Reinstall the transmission pan and torque bolts to specifications.
    8. Refill with new transmission fluid, ensuring the correct amount is added.

Tools Required:

  • OBD-II scanner
  • Socket set
  • Torque wrench
  • Fluid pump
  • Transmission fluid
3. Inspect and Replace Transmission Control Module (if necessary)
  • Sub-steps:
    1. Remove any covers obstructing access to the transmission control module.
    2. Disconnect the electrical connector from the module.
    3. Unbolt and remove the old transmission control module.
    4. Install the new module and torque bolts to specifications.
    5. Reconnect the electrical connector and any covers.

Tools Required:

  • Socket set
  • Torque wrench