how to replace the cabin air filter on BMW X3 F25 (2011-2018)

Solution

1. Preparation

• Tools Required:
  • Torx screwdriver (T20)
  • Flathead screwdriver
  • Clean cloth
• Turn off the ignition and ensure the vehicle is parked on a flat surface.

2. Access the Cabin Air Filter

1. Open the passenger side door.
2. Remove the glove compartment by:
   • Disconnecting the dampening strap (if equipped) using a flathead screwdriver.
   • Unscrewing the Torx screws (T20) securing the glove box.
   • Gently pulling the glove compartment down and disconnecting any electrical connectors (if applicable).

3. Remove the Old Cabin Air Filter

1. Locate the cabin air filter housing behind the glove compartment.
2. Release the clips or screws securing the filter cover.
3. Pull out the old cabin air filter carefully, noting the orientation for the new filter.

4. Install the New Cabin Air Filter

1. Align the new cabin air filter in the same orientation as the old one.
2. Insert the new filter into the housing, ensuring a snug fit.
3. Reattach the filter cover by securing the clips or screws previously removed.

5. Reassemble the Glove Compartment

1. Reconnect any electrical connectors if applicable.
2. Lift the glove compartment back into place and secure it with the Torx screws.
3. Reattach the dampening strap if applicable.