FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix BMW X5 F15 (2014-2019) rear view mirror not adjusting? - BMW X5
Home/Cars/BMW/X5/F15 (2014-2019)/how to fix BMW X5 F15 (2014-2019) rear view mirror not adjusting?

how to fix BMW X5 F15 (2014-2019) rear view mirror not adjusting?

BMW X5 F15 (2014-2019)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
483 words

Problem Statement

The rear view mirror on a 2014-2019 BMW X5 F15 is not adjusting, which may be due to a malfunctioning adjustment motor or a wiring issue.

Estimated Time
1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems to avoid shock.

Symptoms

  • •Rear view mirror does not move when adjustment controls are used
  • •Mirror adjustment switch feels unresponsive or stuck
  • •Possible warning indicator on dashboard related to mirror adjustment
  • •No audible sound from the mirror motor when attempting to adjust
  • •Irregular mirror position, unable to set to desired viewing angle

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Torx screwdriver
  • •OBD-II scanner
  • •Multimeter
  • •Wire connectors (if needed)

Parts Required

  • •Replacement rear view mirror adjustment motor (if faulty)
  • •Mirror assembly cover (if damaged)

Additional Information

Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and the ignition is turned off.
  • Disconnect the battery to prevent electrical shock.
2. Remove Rear View Mirror Assembly
  • Using a Torx screwdriver, carefully remove the screws securing the mirror to the mount.
  • Gently detach the mirror assembly from the windshield.
  • Disconnect the wiring harness from the rear view mirror.
3. Inspect and Test the Mirror Adjustment Motor
  • Remove the cover from the rear view mirror housing to access the adjustment motor.
  • Visually inspect the motor for damage or disconnection.
  • Measure the voltage at the motor connector while activating the adjustment switch; it should read approximately 12V.
4. Replace the Mirror Adjustment Motor (if necessary)
  • If the motor is faulty, disconnect it from the wiring harness.
  • Remove the screws securing the motor to the mirror assembly.
  • Install the new motor by reversing the removal steps and reconnecting the wiring harness.
5. Reassemble the Mirror Assembly
  • Reattach the mirror cover and ensure all components are secure.
  • Position the mirror back onto the windshield mount and secure it with screws.
  • Reconnect the battery.