What should I do if my 2019 Chevrolet Silverado 1500 T1XX has a dead key fob?

Chevrolet Silverado 1500 T1XX (2019-2023)

Error Codes

30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

526 words

Problem Statement

Learn how to diagnose and resolve issues with a dead key fob on your 2019 Chevrolet Silverado 1500 T1XX with these easy steps.

Affected Component

key fob

Estimated Time

30 minutes

Symptoms

•Key Fob Not Responding
•Warning Message
•Distance Limitation

Diagnostic Steps

1
Check for Battery Issues
2
Inspect Key Fob for Damage
3
Test with Spare Key Fob

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Small Phillips or Flathead Screwdriver
•CR2032 or CR2025 Battery
•Multimeter

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

If your 2019 Chevrolet Silverado 1500 T1XX has a dead key fob, follow these detailed steps to diagnose and resolve the issue.

Tools Required

Small Phillips or Flathead Screwdriver: For opening the key fob.
CR2032 or CR2025 Battery: Replacement battery for the key fob (confirm the correct type).
Multimeter (optional): To check the battery voltage if needed.

Repair Instructions

Step 1: Replace the Key Fob Battery

Open the Key Fob
- Locate the seam on the key fob. Use a small flathead screwdriver to gently pry open the fob.
- Be careful not to damage the plastic housing.
Remove the Old Battery
- Note the orientation of the battery (positive and negative sides).
- Remove the battery using your fingers or a small tool.
Install the New Battery
- Insert the new battery in the same orientation as the old one.
- Ensure it is seated correctly in the battery compartment.
Reassemble the Key Fob
- Align the two halves of the key fob.
- Press firmly until you hear a click, indicating it has snapped back together.

Step 2: Reprogram the Key Fob (if necessary)

If the key fob still does not work after replacing the battery, you may need to reprogram it.

Enter Programming Mode
- Insert the key into the ignition and turn it to the "ON" position (do not start).
- Press the "Lock" button on the fob for at least 15 seconds.
- Turn the key to "OFF" and remove it.
Test the Key Fob
- Attempt to lock and unlock the doors using the key fob.
- If it works, the programming was successful.

Step 3: Check for Additional Issues

If the key fob is still unresponsive:

Check the Receiver: The vehicle may have issues with the receiver. Use an OBD-II scanner to check for any fault codes related to the keyless entry system.
Consult a Professional: If all else fails, take the vehicle to a certified Chevrolet dealership or automotive locksmith for further diagnosis.

Conclusion

Following these steps should help you resolve issues with a dead key fob for your 2019 Chevrolet Silverado 1500 T1XX. Regularly check the key fob battery, and keep a spare handy to avoid inconvenience in the future. If you encounter any complications, don’t hesitate to seek professional help.