FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the check engine light on Ford Explorer Fifth Generation (2011-2019) - Ford Explorer
Home/Cars/Ford/Explorer/Fifth Generation (2011-2019)/how to reset the check engine light on Ford Explorer Fifth Generation (2011-2019)

how to reset the check engine light on Ford Explorer Fifth Generation (2011-2019)

Ford Explorer Fifth Generation (2011-2019)

Error Codes
10-15 minutes
Time
easy
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
376 words

Problem Statement

Learn how to reset the check engine light on Ford Explorer Fifth Generation (2011-2019) with step-by-step instructions and necessary tools.

Affected Component
Engine
Estimated Time
10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe location and the engine is off while connecting the OBD-II scanner.

Symptoms

  • •Check engine light illuminated on the dashboard
  • •Possible error codes stored in the vehicle's computer
  • •Engine performance issues (if not resolved beforehand)

Diagnostic Steps

  1. 1
  2. 2
  3. 3

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner

Additional Information

Affected Component
Engine
Estimated Time
10-15 minutes
Difficulty
easy
Severity
medium
Tools Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked on a level surface and the engine is off.
  • Gather necessary tools, including an OBD-II scanner.
2. Connect OBD-II Scanner
  • Locate the OBD-II port under the dashboard, typically near the driver's seat.
  • Plug the OBD-II scanner into the port.
  • Turn the vehicle ignition to the "ON" position without starting the engine.
3. Reset the Check Engine Light
  • Follow the specific instructions on the OBD-II scanner to navigate to the "Erase Codes" or "Reset" function.
  • Confirm the reset action when prompted by the scanner.
  • Disconnect the OBD-II scanner from the port.
4. Test the System
  • Start the engine and allow it to idle for a few minutes.
  • Check if the check engine light remains off.
  • If the light comes back on, further diagnostics may be required.