how to reset the oil change light on Ford Explorer Fifth Generation (2011-2019)

Ford Explorer Fifth Generation (2011-2019)

Error Codes

10 minutes

Time

easy

Difficulty

low

Severity

2 min read

354 words

Problem Statement

Learn how to reset the oil change light on Ford Explorer Fifth Generation (2011-2019) with this step-by-step guide. Ensure accurate maintenance reminders.

Affected Component

Electrical

Estimated Time

10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and on a flat surface before performing the reset.

Symptoms

•Oil change light illuminated on the dashboard
•Maintenance reminder alert displayed
•Engine oil level is adequate but requires resetting the light

Diagnostic Steps

1
Turn the ignition key to the 'On' position without starting the engine.
2
Press the accelerator pedal three times within 10 seconds.
3
Observe the oil change light for any changes.
4
Turn the ignition off and then start the engine to confirm the reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ignition key
•Key fob

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface with the engine off.
Have the ignition key or key fob ready.

2. Access the Ignition

Insert the key into the ignition or have the key fob ready to access the ignition system.

3. Turn on the Ignition

Turn the ignition key to the "On" position (do not start the engine).
If using a key fob, press the "Start" button without pressing the brake pedal.

4. Reset the Oil Change Light

Press the accelerator pedal three times within 10 seconds.
Watch for the oil change light to turn off or blink, indicating that the reset was successful.

5. Confirm the Reset

Turn the ignition off.
Start the engine to ensure that the oil change light does not re-illuminate.