how to reset the tire pressure light on Ford Explorer Fifth Generation (2011-2019)

Ford Explorer Fifth Generation (2011-2019)

Error Codes

30 minutes

Time

medium

Difficulty

medium

Severity

3 min read

422 words

Problem Statement

Learn how to reset the tire pressure light on Ford Explorer (2011-2019). Step-by-step guide with diagnostic steps and safety tips.

Affected Component

Electrical

Estimated Time

30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure tires are cold when measuring pressure to obtain accurate readings.

Symptoms

•Tire pressure warning light illuminated on the dashboard
•Inconsistent tire pressures detected during checks
•Recent tire rotation or replacement performed
•Low tire pressure in one or more tires
•Tire pressure light remains on even after inflation

Diagnostic Steps

1
Verify that all tires are inflated to the recommended pressure, including the spare tire if applicable.
2
Inspect each tire for visible damage or leaks that may affect pressure.
3
Use an OBD-II scanner to check for any related diagnostic trouble codes (DTCs) that may indicate sensor issues.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•OBD-II scanner

Parts Required

•None (unless damaged sensors require replacement)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools: Tire pressure gauge, OBD-II scanner (if needed).
Ensure vehicle is parked on a level surface and turned off.
Confirm all tires, including the spare, are inflated to the manufacturer's recommended pressure.

2. Resetting the TPMS Light

Turn on the Ignition:
- Insert the key or press the start button without starting the engine.
Access the TPMS Reset Procedure:
- For models with the button: Locate the TPMS reset button beneath the steering column.
- Press and hold the reset button until the TPMS indicator blinks three times, then release it.
Start the Vehicle:
- Turn the ignition to the "On" position without starting the engine. Wait for a few seconds.
Drive the Vehicle:
- Drive the vehicle at speeds above 25 mph for about 10 minutes. This allows the system to recalibrate.
Check the TPMS Light:
- Observe the dashboard to see if the TPMS light turns off. If it remains illuminated, repeat the reset process.