my Ford Explorer Fifth Generation (2011-2019) has excessive tire wear what could be causing it

Ford Explorer Fifth Generation (2011-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

442 words

Problem Statement

Learn how to diagnose and fix excessive tire wear in Ford Explorer 2011-2019. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is securely supported on jack stands before working underneath.
•Wear safety glasses to protect your eyes during inspections.

Symptoms

•Uneven tire wear across the tread surface
•Frequent need for tire rotation or replacement
•Vibration felt through the steering wheel while driving
•Vehicle pulling to one side during straight driving
•Noisy tires, particularly on certain road surfaces

Diagnostic Steps

1
Inspect tire pressure to ensure it is within manufacturer specifications.
2
Check for proper wheel alignment using an alignment machine.
3
Examine suspension components for wear or damage, including control arms and bushings.
4
Inspect the tires for any visible defects or irregularities.
5
Test drive the vehicle to identify any handling issues or vibrations.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Tire pressure gauge
•Wrench set
•Alignment machine

Parts Required

•New tires (if existing ones are worn)
•Suspension components (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tire pressure to ensure it is within manufacturer specifications.
2
Check for proper wheel alignment using an alignment machine.
3
Examine suspension components for wear or damage, including control arms and bushings.
4
Inspect the tires for any visible defects or irregularities.
5
Test drive the vehicle to identify any handling issues or vibrations.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Tools Required:
- Jack and jack stands
- Tire pressure gauge
- Wrench set
- Alignment machine

2. Tire Pressure Adjustment

Check each tire's pressure using a tire pressure gauge.
Inflate all tires to the recommended PSI as indicated on the driver's door jamb.

3. Wheel Alignment

Place the vehicle on an alignment rack.
Adjust the front and rear toe settings to the manufacturer’s specifications.
Check camber and caster angles and adjust if needed.

4. Suspension Inspection and Repair

Lift the vehicle and remove the front wheels.
Inspect control arms, bushings, and ball joints for wear and replace any damaged components.
Reassemble the suspension and reattach the wheels.

5. Tire Replacement (if necessary)

If tires are excessively worn, replace them with new ones.
Ensure the new tires are balanced properly using a tire balancer.