FAULTBASE
NEWSASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Ford/Explorer/Sixth Generation (2020-present)/how to fix P0300 code in Ford Explorer Sixth Generation (2020-present)

how to fix P0300 code in Ford Explorer Sixth Generation (2020-present)

Ford Explorer Sixth Generation (2020-present)

Severity: highDifficulty: mediumError Code: P03002-4 hours
3 min read
559 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0300 engine misfire in Ford Explorer (2020-present). Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0300
Component
Engine
Repair Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical systems.
  • ⚠Allow the engine to cool before performing any maintenance.

Symptoms

  • •Check engine light illuminated
  • •Rough idle or engine shaking
  • •Loss of power during acceleration
  • •Poor fuel economy
  • •Increased emissions
  • •Engine stalling

Diagnostic Steps

  1. 1Scan for error codes using an OBD-II scanner to confirm P0300 and check for any other related codes.
  2. 2Inspect the spark plugs for wear, carbon buildup, or damage.
  3. 3Check ignition coils for proper operation and signs of arcing or damage.
  4. 4Examine fuel injectors for clogs or leaks.
  5. 5Conduct a fuel pressure test to ensure the fuel system is delivering adequate pressure.
  6. 6Inspect vacuum hoses and intake manifold for leaks that may affect air-fuel mixture.

Solution

Solution

1. Preparation

  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a flat surface and the engine is cool.
  • Disconnect the battery to prevent electrical shorts.

2. Inspect and Replace Spark Plugs

  • Sub-steps:
    1. Remove the engine cover (if equipped) using a socket set.
    2. Disconnect the ignition coil connectors and remove the ignition coils by unbolting them.
    3. Remove spark plugs using a spark plug socket and ratchet.
    4. Inspect spark plugs for wear; replace with OEM or equivalent parts if necessary.
    5. Reinstall spark plugs and torque them to the manufacturer’s specifications (usually about 13-16 lb-ft).
    6. Reinstall ignition coils and reconnect the connectors.

3. Test and Replace Ignition Coils

  • Sub-steps:
    1. Use a multimeter to check the resistance of each ignition coil.
    2. Replace any faulty ignition coils with OEM or equivalent parts.
    3. Reinstall the ignition coils and ensure they are securely fastened.

4. Inspect and Clean Fuel Injectors

  • Sub-steps:
    1. Disconnect the fuel lines and electrical connectors from the fuel injectors.
    2. Remove the fuel rail to access the injectors.
    3. Clean the injectors using a fuel injector cleaning kit or replace them if they are clogged.
    4. Reinstall the fuel rail and reconnect fuel lines and electrical connectors.

5. Check for Vacuum Leaks

  • Sub-steps:
    1. Visually inspect all vacuum hoses for cracks or disconnections.
    2. Use a smoke machine or propane enrichment method to detect leaks around the intake manifold.
    3. Replace any damaged vacuum hoses.

Verification

After completing the repair, verify that the issue has been resolved:

  • Test the affected component to ensure it functions correctly
  • Check for any error codes or warning lights
  • Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • OBD-II scanner
  • Socket set
  • Torque wrench
  • Multimeter
  • Fuel pressure gauge
  • Screwdrivers
  • Fuel injector cleaning kit

Parts Required

  • Spark plugs (OEM recommended)
  • Ignition coils (as needed)
  • Fuel injectors (if clogged or leaking)

Additional Information

Error CodeP0300
Component

Engine

Repair Time

2-4 hours

Difficulty

medium

Severity

high

Tools

7 items

Parts

3 items

Related Faults

Discover similar issues

  1. How can I fix the Ford Explorer 2021's Bluetooth connectivity issues?

    Learn how to troubleshoot and fix Bluetooth connectivity issues in your 2021 Ford Explorer with systematic steps and required tools.

    Component:Bluetooth system
    Symptoms
    • •Phone not connecting to the car's Bluetooth.
    • •Dropped connections during calls or audio playback.
    • +{count} more
  2. What should I do if my Ford Explorer 2020 has a smell of burning rubber?

    Learn how to diagnose and fix the burning rubber smell in your 2020 Ford Explorer with detailed steps and required tools.

    Component:serpentine belt, brake components, hoses, tires, electrical systems
    Symptoms
    • •Burning rubber smell
    • •Visual signs of smoke or damage
    • +{count} more
  3. What should I check if my 2021 Ford Explorer has a strong fuel odor?

    Learn how to diagnose and repair a strong fuel odor in your 2021 Ford Explorer with detailed steps and required tools.

    Component:fuel system
    Symptoms
    • •Strong smell of gasoline, especially near the rear or undercarriage of the vehicle.
    • •Possible fuel leak on the ground beneath the vehicle.
    • +{count} more
  4. What are the common causes of the Ford Explorer 2020 stalling?

    Learn about the common causes, symptoms, and diagnostic steps for addressing stalling issues in the 2020 Ford Explorer.

    Component:engine
    Symptoms
    • •Engine cuts off while driving or idling
    • •Rough idling before stalling
    • +{count} more
  5. How do I resolve issues with the Ford Explorer 2020's climate control system?

    Learn how to diagnose and repair climate control system issues in a 2020 Ford Explorer with step-by-step instructions.

    Component:climate control system
    Symptoms
    • •No Airflow
    • •Inconsistent Temperature
    • +{count} more
  6. What should I do if my 2020 Ford Explorer's windshield wipers are not working?

    Learn how to diagnose and repair windshield wiper issues on your 2020 Ford Explorer with this detailed guide.

    Component:windshield wipers
    Symptoms
    • •Windshield wipers do not move when activated
    • •Wipers move slowly or erratically
    • +{count} more

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation