how to fix P0700 code on Ford Explorer Sixth Generation (2020-present)

Solution

1. Preparation

• Gather necessary tools and parts.
• Disconnect the vehicle's battery to ensure safety while working on electrical components.

2. Check and Replace Transmission Fluid

• Tools Required: Transmission fluid pump, drain pan, funnel, socket set
• Drain the old transmission fluid into a drain pan by removing the transmission pan bolts.
• Replace the filter if applicable; use a new gasket for the transmission pan.
• Refill with the manufacturer-recommended transmission fluid type (e.g., Mercon ULV).
• Securely reattach the transmission pan with the appropriate torque specifications.

3. Inspect and Repair Electrical Connections

• Tools Required: Multimeter, wire brush, dielectric grease
• Inspect the wiring harness and connectors for any damage or corrosion.
• Clean any corroded connectors with a wire brush and apply dielectric grease to protect against moisture.
• Repair or replace any damaged wiring as necessary.

4. Replace the Transmission Control Module (if needed)

• Tools Required: Socket set, torque wrench, OBD-II scanner
• Disconnect the battery again.
• Remove the TCM by unscrewing it from its mounting location.
• Install the new TCM, ensuring it is securely fastened to the mount.
• Reconnect the battery and use the OBD-II scanner to program or clear the TCM if necessary.